Alternatives and similar repositories for Adafruit-Grand-Central-PCB:

Users that are interested in Adafruit-Grand-Central-PCB are comparing it to the libraries listed below

• blackketter / teensy4_header_breakout
  Teensy 4.0 Breakout Board
  ☆25Updated 5 years ago
• SebG3D / TapePuller
  tape puller/remover for 0816 automatic feeder
  ☆21Updated 5 years ago
• adafruit / Adafruit_seesawPeripheral
  Arduino library for making seesaw peripherals using Arduino core!
  ☆27Updated 7 months ago
• adafruit / Adafruit-96x64-RGB-OLED-Breakout-PCB
  PCB files for the Adafruit Mini Color OLED
  ☆12Updated 5 years ago
• arturo182 / serpente_hw
  ☆35Updated 5 years ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago
• alvarop / usb_c_power
  ☆13Updated 4 years ago
• adafruit / Adafruit-CP2104-Friend-PCB
  PCB files for the Adafruit CP2104 Friend
  ☆10Updated 5 years ago
• adafruit / Adafruit-128x32-I2C-OLED-Breakout-PCB
  Eagle CAD files for the Monochrome I2C OLED breakout board
  ☆21Updated 3 years ago
• galacticstudios / Logic-Meter
  ☆43Updated 4 years ago
• giacu92 / Arduino-Reflow-Oven-Controller
  This repo contains all the files of my Arduino Nano based Reflow Oven PID Controller for reflow smd soldering.
  ☆16Updated last year
• MangyDogUK / ReflowOven
  The source code for my reflow oven, WARNING use at your own risk. This project deals with MAINS VOLTAGES which can kill.
  ☆23Updated 4 years ago
• IWILZ / PicoSem
  Simple library to exchange data between the 2 cores of a Raspberry Pi Pico under Arduino IDE framework
  ☆26Updated 2 years ago
• beast-devices / ant2-usb-c-lipo-charger
  Tiniest USB-C LiPo charger
  ☆34Updated 2 years ago
• adafruit / Adafruit-1.3inch-128x64-Mono-OLED-PCB
  Adafruit 1.3inch 128x64 Mono OLED PCB Eagle files
  ☆17Updated 4 years ago
• baldengineer / Open-Vapors
  Open Source Reflow Oven Controller.
  ☆19Updated 3 years ago
• ketszim97 / Mini_PD
  Miniature version of the USB_C_PD with the STUSB4500
  ☆27Updated 4 years ago
• luni64 / MicroMod_3.2
  NXP MK20DX256 board for the Sparkfun MicroMod system. Should be able to run Teensy 3.2 firmware
  ☆16Updated 4 years ago
• technoblogy / tiny-function-generator
  A signal generator based on an ATtiny85 that generates a range of different waveforms
  ☆32Updated 5 years ago
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆27Updated 6 years ago
• technoblogy / continuity-tester
  A simple continuity tester, based on an ATtiny85 and a piezo buzzer.
  ☆18Updated 7 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 5 years ago
• RalphBacon / 230-Ultimate-Switch-Bounce-Eliminator
  Is this hardware solution the ultimate in switch bounce elimination? Simple PCB, cheap components = final solution!
  ☆13Updated 3 years ago
• adafruit / RP2040-Based-Tester-Brains-PCB
  PCB files for the Adafruit RP2040 Based Tester Brains
  ☆16Updated 2 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• JamesNewton / BOBPID
  A VERY cheap, tested, working, PIC based P.I.D. PID servo controller
  ☆12Updated 2 weeks ago
• RoboticsBrno / RB0005-UniversalStepDown
  Universal step-down module
  ☆26Updated 4 years ago
• borgel / bolton_buttons
  Small devices to add keys to devices that have too few
  ☆13Updated 6 years ago
• 32teeth / Eagle-Libraries-by-32teeth
  A collection of Eagle CAD Libraries by 32teeth
  ☆14Updated 5 months ago
• sgreg / 4chord-midi
  The 4chord USB MIDI Keyboard
  ☆36Updated 4 months ago