mwittig / node-fronius-solar
Access PV live logs using the Fronius Solar API
☆42Updated 2 years ago
Alternatives and similar repositories for node-fronius-solar
Users that are interested in node-fronius-solar are comparing it to the libraries listed below
Sorting:
- Python tools to work with the json data of the Fronius Solar API☆48Updated 2 years ago
- Venus OS driver for Fronius PV Inverters as well as other Sunspec ModbusTCP compliant inverters☆28Updated last month
- Library to simulate multiple Somfy remote controls.☆32Updated 4 years ago
- Python module to access PV systems in Sunny Portal☆42Updated 2 years ago
- Brings EVSE WB/DIN into your WiFi☆79Updated 2 years ago
- Venus OS service mapping the D-Bus on Venus OS to MQTT☆114Updated last year
- Raspberry Pi Power meter☆89Updated 3 years ago
- A Node-RED node set for providing access to generic BLE peripheral GATT characteristics.☆25Updated 2 years ago
- ESPHome component for the Bosch BME680 sensor via BSEC providing temperature, humidity, pressure and indoor air quality measurements.☆88Updated 2 years ago
- Automated JSON API based communication with Fronius Symo☆27Updated last month
- Simple VE.Direct reader for Python☆99Updated 4 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆128Updated 3 years ago
- ☆111Updated last year
- A scraper for power devices to feed data to OpenEnergyMonitor☆35Updated last month
- MQTT Bridge for IKEA TRÅDFRI Light Gateway☆81Updated 4 years ago
- This library provides functions to communicate through the EMS Bus with Buderus/Nefit/Worcester (or any other EMS Bus compatible) boilers…☆17Updated 6 years ago
- Buderus Logamatic EMS and EMS+/EMS Plus bus Wiki for Bosch, Buderus, Nefit, Junkers, Worcester devices☆46Updated 4 years ago
- ☆47Updated 3 years ago
- This library supports the reading and parsing of smartmeter protocols that follow the OBIS number logic to make their data available.☆55Updated last year
- support for the VE.Direct serial protocol supported by many Victron Energy products☆22Updated 7 months ago
- Optimize your energy consumption☆11Updated 2 months ago
- SunSpec Python library for interfacing with SunSpec devices.☆63Updated 2 weeks ago
- vcontrold Daemon for control and logging of Viessmann® type heating devices☆112Updated 8 months ago
- ☆112Updated this week
- nodejs modul with protocol support for different 433mhz switches and weather stations for the RFControl Arduino library.☆49Updated 2 years ago
- Python service linking and decoding input to MQTT & Emoncms☆96Updated 3 months ago
- Code for varios IoT devices☆62Updated 5 years ago
- Arduino library to control non-smart roller shutters using time☆61Updated 4 years ago
- ☆11Updated 2 years ago
- Module for controlling shutters depending on various conditions☆8Updated 3 months ago