Alternatives and similar repositories for openDR-Remote:

Users that are interested in openDR-Remote are comparing it to the libraries listed below

• hobbyquaker / mqtt-dmx-controller
  A simple ArtNet / DMX Controller with MQTT Interface 💡🎬
  ☆67Updated 5 years ago
• chrisstaite / TeensyDmx
  DMX Transmit and Receive for Teensy with RDM support.
  ☆52Updated 6 years ago
• claudeheintz / LXDMXWiFi_Library
  Library for ESP8266 implements Art-Net and sACN with example DMX input/output to/from network
  ☆76Updated 2 years ago
• mtongnz / DMX_LED_Strips
  Arduino DMX controller for RGB LED strips.
  ☆28Updated 8 years ago
• dirkx / SMPTE-EBU-TimecodeGenerator-ESP32
  ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.
  ☆52Updated 2 years ago
• hobbyquaker / mqtt-dmx-sequencer
  Control DMX devices via Art-Net by MQTT. Includes a simple sequencer. 💡🎬
  ☆25Updated 7 years ago
• chrisstaite / ArduinoArtNet
  ArtNet library for Arduino
  ☆16Updated 10 years ago
• rstephan / ArtnetnodeWifi
  Arduino library for a Art-Net-Node (artnet) over WiFi, handle DMX data and response to Poll requests. Runs on ESP8266, ESP32, WiFi101 and…
  ☆84Updated 6 months ago
• Rickgg / ESP-Dmx
  A library to use the ESP8266 as a DMX controller
  ☆121Updated 3 years ago
• claudeheintz / LXESP32DMX
  ☆68Updated 3 months ago
• tadas-s / OSC2Midi
  ESP8266 based OSC <-> MIDI WiFi bridge
  ☆33Updated 5 years ago
• OpenLightingProject / ja-rule
  Ja Rule is the code behind OLE, an Open Source DMX/RDM framework for PIC32 microcontrollers
  ☆48Updated 4 years ago
• emmanuelgeoffray / DmxUsbProArduino
  Make your arduino act like an enttec dmx usb pro
  ☆26Updated 9 years ago
• rpitv / atem-tally
  Node.js ATEM tally interface built to run on a Raspberry Pi over XLR cables
  ☆23Updated last year
• gunnebo-ab / node-red-contrib-artnet
  Node-RED node that controls lights via Art-Net
  ☆9Updated 5 years ago
• darknessii / rpi-matrix-artnet
  Controlling of 32x32 or 16x32 RGB LED displays using Raspberry Pi rpi-rgb-led-matrix with Art-Net
  ☆33Updated 7 years ago
• mathertel / DmxSerial2
  An Arduino library for sending and receiving DMX RDM packets.
  ☆101Updated last year
• spacemanspiff2007 / PyArtNet
  "Python wrappers for the Art-Net protocol to send DMX over Ethernet"
  ☆72Updated last year
• voc / aes67-recorder
  A Linux/GStreamer-Based AES67 Multitrack Audio Backup Solution
  ☆96Updated 6 years ago
• PaulStoffregen / DmxSimple
  ☆101Updated 2 years ago
• hobbyquaker / artnet
  Send ArtDMX to an Art-Net node (DMX512, Stage Lighting) 💡🎬
  ☆123Updated 5 years ago
• boxysean / beaglebone-DMX
  Library to turn BeagleBone into a DMX interface
  ☆32Updated 12 years ago
• TkkrLab / py-ledart
  Python led controle software
  ☆16Updated last year
• ssilverman / TeensyDMX
  A full-featured DMX library for Teensy 3, Teensy LC, and Teensy 4. "Programmable DMX and arbitrary USB serial device emulation."
  ☆103Updated last year
• DaAwesomeP / dmxusb
  DMXUSB emulates an ENTTEC-compatible DMXKing USB to DMX serial device with one, two, or n universes.
  ☆115Updated 5 years ago
• lowlander / dmx_usb_module
  Linux kernel module for Enttec Open DMX dongle
  ☆43Updated 10 months ago
• philchristensen / python-artnet
  a Pure-Python ArtNET/OpenDMX toolkit for lighting design
  ☆66Updated 7 years ago
• Hundemeier / sacn
  A simple ANSI E1.31 (aka sACN) module for python.
  ☆50Updated 2 months ago
• kylophone / a-look-at-livewire
  A Look at the Axia Livewire AoIP Protocol
  ☆26Updated 7 years ago
• utopiantools / visca-ip-proxy-arduino
  Uses a WiFi enabled microcontroller to proxy VISCA commands from UDP to RS-232 and vice versa.
  ☆14Updated 4 years ago