OpenLightingProject / ja-rule
Ja Rule is the code behind OLE, an Open Source DMX/RDM framework for PIC32 microcontrollers
☆48Updated 4 years ago
Alternatives and similar repositories for ja-rule:
Users that are interested in ja-rule are comparing it to the libraries listed below
- Arduino RGB Mixer☆19Updated 4 years ago
- RP2040-based USB DMX dongle with integrated web server☆103Updated last month
- Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE☆88Updated last month
- Linux kernel module for Enttec Open DMX dongle☆43Updated 9 months ago
- DMXUSB emulates an ENTTEC-compatible DMXKing USB to DMX serial device with one, two, or n universes.☆114Updated 5 years ago
- Laser show controller for Raspberry Pi☆53Updated 8 years ago
- DMX Transmit and Receive for Teensy with RDM support.☆51Updated 6 years ago
- ☆34Updated 4 years ago
- DMX input/output driver for Arduino/AVR microcontrollers☆17Updated 8 years ago
- An Open Source implementation of the ArtNet protocol☆129Updated 8 months ago
- A board for driving 32 strings of pixels from a Teensy 4.1. Similar to the OctoWS2811, but with 32 outputs.☆14Updated 3 years ago
- Controlling of 32x32 or 16x32 RGB LED displays using Raspberry Pi rpi-rgb-led-matrix with Art-Net☆33Updated 6 years ago
- An Arduino library for sending and receiving DMX RDM packets.☆101Updated last year
- Library for Arduino with Ethernet Shield implements Art-Net and sACN with example DMX output using USART serial☆26Updated 3 years ago
- DMX Receiver Arduino driver for Teensy 3.1 boards☆14Updated 10 years ago
- Project to store DMX frames received over ArtNet into a SD card and play them back to a WS2812B LED strip using nodemcu☆41Updated 6 years ago
- Library for ESP8266 implements Art-Net and sACN with example DMX input/output to/from network☆76Updated 2 years ago
- LXSAMD21DMX is a driver for sending or receiving DMX using an AVR SAMD21 microcontroller.☆30Updated 2 years ago
- spdif input for teensy 4☆17Updated 2 years ago
- Control DMX devices via Art-Net by MQTT. Includes a simple sequencer. 💡🎬☆24Updated 7 years ago
- A system to control a stepper motor over DMX protocol.☆13Updated 5 years ago
- ☆67Updated 2 months ago
- Design files for the Pixie 3W RGB smart LED☆16Updated 8 years ago
- Code for the rdm.openlighting.org site☆16Updated 3 weeks ago
- DMX Driver for ESP8266 using ArduinoIDE☆31Updated 2 years ago
- A 16bit 6ch DAC for ILDA up to 400kpps☆41Updated 3 years ago
- Logic Analyzer plugin for WS2812 addressable LEDs.☆24Updated 8 years ago
- Simple ESP8266 board to drive WS2812 LED strips☆18Updated 2 years ago
- ☆25Updated last year
- Art-Net library for Arduino, Teensy, etc.☆34Updated 4 years ago