Alternatives and similar repositories for nicos:

Users that are interested in nicos are comparing it to the libraries listed below

• tiagocoutinho / sinstruments
  Simulate any equipment (multimeter, oscilloscope, detectors, motors) over tcp, udp or serial line
  ☆28Updated 2 weeks ago
• tiagocoutinho / ser2sock
  serial line to socket bridge (so far only tcp)
  ☆10Updated last year
• jubnzv / IEC.vim
  Vim mode for editing IEC 61131-3 programs.
  ☆15Updated 2 years ago
• Argonne-National-Laboratory / PyGMI
  Open source graphical interface for taking generic measurements over GPIB, USB, ethernet, serial...
  ☆35Updated 4 years ago
• ezramorris / PyVirtualSerialPorts
  A Python implementation of virtual serial ports for *nix
  ☆33Updated 5 months ago
• rambo / python-scpi
  Since all the other wrappers either require VISA binary or are not generic (and do not implement the device I need)
  ☆47Updated 3 weeks ago
• python-trio / asyncgpio
  A small library to access GPIO pins the Trio way. Linux 4.9+ only.
  ☆10Updated 2 years ago
• DavidLutton / LabToolkit
  Python module for instrument control and automation.
  ☆24Updated last month
• tparviainen / oscilloscope
  This repo contains Scope .NET Core application and SCPI .NET Standard library that can be used to control DSO (Digital Storage Oscillosco…
  ☆11Updated 2 years ago
• martin-bochum / Multimeter
  Digital Multimeter Control USB TCP RS232
  ☆11Updated last year
• taurus-org / taurus
  Moved to https://gitlab.com/taurus-org/taurus
  ☆43Updated 3 years ago
• sardana-org / sardana
  Moved to GitLab: https://gitlab.com/sardana-org/sardana
  ☆39Updated 3 years ago
• tivek / gpib_ctypes
  ☆14Updated 5 years ago
• bsdphk / pylt
  Python LabTools for talking to GPIB instruments
  ☆26Updated 6 years ago
• epics-modules / ecmc
  EPICS Support for EtherCAT Motion Controller (ECMC) and Generic IO Controller
  ☆26Updated this week
• MR-DOS / MWGEN-G1
  12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
  ☆14Updated 3 years ago
• saleae / one-wire-analyzer
  Saleae 1-Wire Analyzer
  ☆11Updated last year
• DiamondLightSource / ethercat
  EPICS support to read/write to ethercat based hardware
  ☆24Updated 2 years ago
• sinara-hw / Stabilizer
  2-channel microcontroller servo with EEM and Ethernet based on STM32 CPU
  ☆21Updated last year
• menyoung / RusticLab
  A Rust package with bindings to the "Virtual Instrument Software Architecture" VISA library, in order to control measurement devices and…
  ☆13Updated 9 years ago
• wd5gnr / SerialMux
  Serial Multiplexer for Linux and Microcontrollers
  ☆22Updated 2 years ago
• tango-controls / pytango
  This project was moved to gitlab.com
  ☆55Updated 3 years ago
• OpenAutomationTechnologies / openCONFIGURATOR_eclipse_plugin
  openCONFIGURATOR 2.0 eclipse plugin
  ☆9Updated 6 years ago
• slaclab / pydm
  Python Display Manager
  ☆119Updated this week
• deadsy / py_plc
  Python code to help with PLC ladder logic programming
  ☆18Updated 10 years ago
• freand76 / digsim
  An interactive digital logic simulator with verilog support (Yosys)
  ☆17Updated 3 months ago
• SamsungSLAV / muxpi
  MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices. Initial goal was to …
  ☆17Updated 3 years ago
• sinara-hw / FMC_Shuttler
  16-channel 125MS/s 16bit DAC in FMC form factor.
  ☆16Updated 7 months ago
• MicroBeaut / Finite-State
  Finite-State Machine (FSM) for Arduino
  ☆10Updated last year
• timhellwig / sci_instr
  Module to communicate with scientific instruments via a VISA connection. Hide actual commands (e.g. SCPI) in a yaml file and access instr…
  ☆10Updated 4 years ago