microtherion / ScratchMonkeyLinks
Arduino software programmer sketch, supporting ISP, HVSP, and HVPP
☆70Updated last year
Alternatives and similar repositories for ScratchMonkey
Users that are interested in ScratchMonkey are comparing it to the libraries listed below
Sorting:
- usbasp improved firmware☆57Updated 4 years ago
- Modification of USBasp firmware to support UART debugging.☆63Updated 5 years ago
- DIY UPDI programmer with open source hardware!☆74Updated 9 months ago
- Alternative firmware for the B3603☆67Updated 7 years ago
- ☆47Updated 7 years ago
- An (V)USB bootloader firmware for AVR-MCUs emulating the popular USBasp for programming itself☆186Updated 5 years ago
- My repo for experimenting with the usbasp firmware from www.fischl.de☆36Updated 8 years ago
- make arduino board to be LGT8FX8D/P programmer☆69Updated 3 years ago
- Triple USB-to-serial adapter firmware for flashing onto an STM32F103C8T6 "blue pill" minimum development board ⛺☆139Updated 5 years ago
- Reverse engineering of the gm328a transistor tester + Tetris☆53Updated 5 years ago
- Adafruit TFT library using 8 bit parallel access ported to STM32☆52Updated 5 years ago
- An improved ATMega328P with this cheap clone Logic Green LGT8F328P☆154Updated 3 years ago
- Small AVR bootloader using urprotocol☆90Updated 3 months ago
- USI based TWI/I2C library for Arduino☆60Updated 5 years ago
- OSC Calibrator and High-Voltage Fuse Resetter for 8-Pin ATtinys☆56Updated 2 years ago
- Example codes using sdcc to target STM8S MCUs.☆46Updated 5 years ago
- AVR high-voltage (HV) serial programming for ATtiny☆43Updated 8 years ago
- USBasp firmware working with a clone "USB ISP Version 2.0" (marked "MX-USBISP-Vx.00 on the PCB)☆100Updated 8 months ago
- UPDI programmer software for Arduino (targets ATtiny 417 / 814 / 816 / 817 / 1614 / 1616 / 1617 and similar MCUs)☆76Updated 3 years ago
- This is the fast avr programmer for AVR MCUs based on cheap stm32f103c8t6 board with usb-to-serial support.☆101Updated this week
- This is a fork from arduino/ArduinoCore-samd on GitHub. This will be used to maintain Arduino support for SAM D|L|C (M0+ and M4F) boards …☆107Updated last year
- ESP8266 firmware that implements the SWIM protocol for debug access / flashing of STM8 devices☆96Updated last year
- ATtiny85/45/25 I2C bootloader☆113Updated 2 years ago
- STM32F103 based minimalist oscilloscope.☆191Updated 7 years ago
- Arduino Bootloader to Flash from SD Card☆132Updated 2 years ago
- PC tool for uplading hexfiles to the STM8 microcontroller via UART or SPI , using the built-in ROM bootloader. Works under Windows and Po…☆85Updated 9 months ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆89Updated 4 years ago
- Automatically exported from code.google.com/p/nerdralph☆50Updated 4 years ago
- Minimalistic terminal based on STM32 and ILI9341 2.2" LCD☆39Updated 8 years ago
- size-optimized Arduino/Wiring core for tiny AVR MCUs☆30Updated 4 years ago