baruch / b3603Links
Alternative firmware for the B3603
☆67Updated 6 years ago
Alternatives and similar repositories for b3603
Users that are interested in b3603 are comparing it to the libraries listed below
Sorting:
- Reflow Oven Controller. See below for more information.☆79Updated 5 years ago
- My repo for experimenting with the usbasp firmware from www.fischl.de☆36Updated 7 years ago
- ☆48Updated 7 years ago
- DIY Electronic load for DCDC converter characterization☆50Updated 4 years ago
- Minimalistic terminal based on STM32 and ILI9341 2.2" LCD☆39Updated 7 years ago
- ☆67Updated 9 years ago
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆134Updated last year
- Schematics and code for the Re:load Pro☆100Updated 8 years ago
- Solder Paste Dispenser☆18Updated 10 years ago
- This is all of the code, datasheets and design files for my instructable☆37Updated 9 years ago
- ESP8266 firmware that implements the SWIM protocol for debug access / flashing of STM8 devices☆91Updated 9 months ago
- Open-Source firmware for the ZPB30A1 electronic load (WIP)☆50Updated 7 years ago
- ESP8266-based I2S-output WS2812(B) Driver☆51Updated 9 years ago
- The soldering controller for hakko 907 with lcd screen☆29Updated 6 years ago
- CODE: Custom firmware for Youyue 858D+ (ATmega168/328P)☆169Updated 7 years ago
- STM32 controller for cheap Chinese handle☆19Updated 6 years ago
- Reverse engineering of the gm328a transistor tester + Tetris☆53Updated 5 years ago
- ☆45Updated 7 years ago
- Arduino compatible reflow oven controller☆134Updated 12 years ago
- An all-in-one Arduino compatible reflow controller powered by ATtiny1634R☆124Updated 3 years ago
- AVR high-voltage (HV) serial programming for ATtiny☆41Updated 8 years ago
- Simple build system for stm8s chips with SDCC toolchain, Stm8_StdPeriph_Driver and stm8flash flasher☆15Updated 7 years ago
- This is my "bare metal" repository for the STM8S103F3 microcontroller (Ebay $1 each). I am using the SDCC compiler and an STLINK-V2 to pr…☆17Updated 8 years ago
- Set the voltage of a Quick Charge 2.0 source via the Arduino.☆68Updated 7 years ago
- Arduino software programmer sketch, supporting ISP, HVSP, and HVPP☆71Updated last year
- Automatically exported from code.google.com/p/nerdralph☆49Updated 3 years ago
- ATtiny85/45/25 I2C bootloader☆113Updated 2 years ago
- A frequency / Hertz meter based on STM32F103 MCUs.☆48Updated 6 years ago
- Modification of USBasp firmware to support UART debugging.☆63Updated 5 years ago
- Little Wire is multi-featured USB controlled open source hardware tool packed in a minimal form factor designed by ihsan Kehribar.☆101Updated 7 years ago