Alternatives and similar repositories for USBaspLoader

Users that are interested in USBaspLoader are comparing it to the libraries listed below

• adafruit / Adafruit_Atmega32u4_Breakout_Board
  Atmega32u4 Breakout Board
  ☆90Updated 6 years ago
• microtherion / ScratchMonkey
  Arduino software programmer sketch, supporting ISP, HVSP, and HVPP
  ☆71Updated last year
• cpldcpu / TinyTouchLib
  ANSI-C Library for touch-button input on ATtiny AVR microcontrollers with integrated ADC
  ☆79Updated last month
• sparkfun / Graphical_Datasheets
  Code, final versions, and information on the SparkFun Graphical Datasheets
  ☆146Updated 10 months ago
• wholder / ATTiny10IDE
  A Streamlined IDE for Coding and Programming the ATtiny10 and other ATTiny Devices
  ☆177Updated 4 years ago
• MCUdude / microUPDI
  DIY UPDI programmer with open source hardware!
  ☆74Updated 11 months ago
• rogerclarkmelbourne / STM32_Pill_Boards
  Various STM32 boards in a form factor similar to the Maple Mini or Blue Pill board
  ☆50Updated 6 years ago
• mattairtech / ArduinoCore-samd
  This is a fork from arduino/ArduinoCore-samd on GitHub. This will be used to maintain Arduino support for SAM D|L|C (M0+ and M4F) boards …
  ☆108Updated last year
• RalphBacon / LGT8F328P-Arduino-Clone-Chip-ATMega328P
  An improved ATMega328P with this cheap clone Logic Green LGT8F328P
  ☆154Updated 3 years ago
• lemcu / LemcUSB
  A purely software based USB peripheral for ARM Cortex M0+ devices
  ☆114Updated 11 years ago
• tsaarni / avr-high-voltage-serial-programming
  AVR high-voltage (HV) serial programming for ATtiny
  ☆43Updated 8 years ago
• aleh / usbisp
  USBasp firmware working with a clone "USB ISP Version 2.0" (marked "MX-USBISP-Vx.00 on the PCB)
  ☆102Updated 10 months ago
• pingumacpenguin / STM32-O-Scope
  STM32F103 based minimalist oscilloscope.
  ☆192Updated 7 years ago
• gicking / stm8gal
  PC tool for uplading hexfiles to the STM8 microcontroller via UART or SPI , using the built-in ROM bootloader. Works under Windows and Po…
  ☆85Updated 11 months ago
• rampadc / cc254x-hidKbdM
  HID Keyboard and Mouse firmware for CC2541 ICs
  ☆158Updated 6 years ago
• mraardvark / pyupdi
  Python UPDI driver for programming "new" tinyAVR and megaAVR devices
  ☆221Updated 3 years ago
• rocketscream / TinyReflowController
  An all-in-one Arduino compatible reflow controller powered by ATtiny1634R
  ☆127Updated 4 years ago
• essboyer / DSO138
  Source code for DSO138 Oscilloscope Firmware
  ☆72Updated 9 years ago
• Blinkinlabs / ch554_sdcc
  CH554 software development kit for SDCC
  ☆319Updated last year
• wagiminator / ATtiny84-TinyCalibrator
  OSC Calibrator and High-Voltage Fuse Resetter for 8-Pin ATtinys
  ☆58Updated 2 years ago
• wagiminator / VUSB-AVR
  V-USB Board Definition Package for Arduino IDE
  ☆41Updated 4 years ago
• cpldcpu / SimPad
  Work towards an open source programmer for Padauk MCUs
  ☆75Updated 5 years ago
• madworm / Panelization.pretty
  LAYOUT FILES: KiCad footprints useful for PCB panelization (mouse-bites...).
  ☆135Updated 3 years ago
• casanovg / timonel
  ATtiny85/45/25 I2C bootloader
  ☆113Updated 2 years ago
• stevstrong / Adafruit_TFTLCD_8bit_STM32
  Adafruit TFT library using 8 bit parallel access ported to STM32
  ☆52Updated 6 years ago
• zevero / avr_boot
  Arduino Bootloader to Flash from SD Card
  ☆134Updated 2 years ago
• ThomasVDD / SmartSupply
  SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
  ☆94Updated 7 years ago
• free-pdk / easy-pdk-programmer-hardware
  Easy PDK programmer for PADAUK microcontroller. EDA, schematic, gerber, bom, housing stl, firmware
  ☆186Updated last year
• tibounise / SSD1306-AVR
  Simple SSD1306 library for AVR microcontrollers.
  ☆83Updated 8 years ago
• cpldcpu / u-wire
  Smallest possible USB compliant device with V-USB
  ☆68Updated 10 years ago