martgras / esphome
ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
☆28Updated 2 weeks ago
Alternatives and similar repositories for esphome:
Users that are interested in esphome are comparing it to the libraries listed below
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆82Updated 3 weeks ago
- How to extract data from the EPEver TRACER-AN using the eBox-Wifi-01 with Home Assistant☆22Updated 4 years ago
- ESPHome Modbus Server component☆44Updated last year
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆86Updated 2 weeks ago
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆143Updated last month
- Home Assistant plug-in for Victron Instant Readout compatible devices☆88Updated 2 weeks ago
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆154Updated 10 months ago
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆126Updated this week
- ☆30Updated 3 years ago
- Little Program for ESP82XX to get the Victron data to web and MQTT☆68Updated this week
- SmartShunt ve.direct to ESPHOME node☆71Updated last year
- Read data From Seplos BMS and send them to the Home Assistant☆44Updated last year
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated last month
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆51Updated 2 years ago
- ESPHome Component for Daikin Mini-Splits using the S21 serial port.☆81Updated last month
- Custom Component for ESPHome enabling Serial over TCP☆43Updated 10 months ago
- Stream server (serial-to-wifi bridge) for ESPHome☆228Updated last year
- ESPHome component to monitor and control a pipsolar inverter via RS232☆121Updated last month
- ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter☆100Updated last year
- ☆33Updated 2 months ago
- Home Assistant bootstrap for monitoring solar for Deye/Sunsynk/Sol-Ark☆66Updated last week
- Home Assistant custom component for Pylontech (high voltage) BMS accessed via console☆16Updated 9 months ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆181Updated 6 months ago
- ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…☆43Updated last month
- ☆119Updated 2 years ago
- Control Fairland Heatpumps without Tuya☆23Updated 11 months ago
- ZigStar LAN/Wifi/POE Gateways☆170Updated last year
- Sonoff NSPanel protocol and hacking information. Tasmota Berry driver for NSPanel☆136Updated 8 months ago
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆52Updated last week
- ☆32Updated 3 years ago