gabrielpc1190 / Home-Assistant_EPEver-eBox-Wifi-01-MODBUSLinks
How to extract data from the EPEver TRACER-AN using the eBox-Wifi-01 with Home Assistant
☆22Updated 4 years ago
Alternatives and similar repositories for Home-Assistant_EPEver-eBox-Wifi-01-MODBUS
Users that are interested in Home-Assistant_EPEver-eBox-Wifi-01-MODBUS are comparing it to the libraries listed below
Sorting:
- Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.☆291Updated 2 weeks ago
- Home Assistant Dashboard to display Inverter information. ESPHome configuration to collect inverter sensor data via modbus☆162Updated this week
- Victron Mppt charger ve.direct to esphome node☆360Updated last week
- A Home Assistant component for vans, RVs, boats, etc that sets system timezone and geocode sensors.☆14Updated last month
- ⚡A customizable Home Assistant card to emulate the Sunsynk System flow that's displayed on the Inverter screen.☆297Updated this week
- Kamstrup Multical 21 water meter in Home Assistant (Wireless MBus)☆63Updated last month
- ESPHome component to monitor and control a pipsolar inverter via RS232☆123Updated 3 weeks ago
- SmartShunt ve.direct to ESPHOME node☆71Updated last year
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆175Updated last week
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆98Updated last week
- ☆224Updated this week
- Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK and Supervolt BMS via Bluetooth☆397Updated 3 months ago
- Home Assistant plug-in for Victron Instant Readout compatible devices☆107Updated last month
- PCB and housing for ESPHome integration with Kamstrup Multical 403 meter☆31Updated last year
- Solcast Integration for Home Assistant☆272Updated this week
- Home Assistant Lovelace Windrose Card☆156Updated last month
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆89Updated last week
- Esphome component for Deye 3 phase inverters for Home Assistant☆174Updated 7 months ago
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆160Updated this week
- ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Autom…☆30Updated 3 weeks ago
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆51Updated 3 years ago
- Integration for Home Assistant to fetch data from the victron gx device via modbusTCP☆254Updated last week
- Esphome configuration for Somfy Blind☆33Updated 4 years ago
- Home Assistant BLE Integration for BLE-YC01 Pool Monitor☆40Updated 3 weeks ago
- A smartmeter project, made for ESPHome (hardware + ESPHome config)☆80Updated 9 months ago
- Custom component for Home Assistant to connect Helios ventilation system.☆12Updated 2 years ago
- ESPHome component to remote control Truma CP Plus Heater☆63Updated last year
- ☆55Updated last month
- ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…☆56Updated 3 months ago
- Yet another multi-BMS Merging Solution☆107Updated this week