Alternatives and similar repositories for terminal-s:

Users that are interested in terminal-s are comparing it to the libraries listed below

• sipeed / M1s_BL808_example
  M1s_BL808_example
  ☆69Updated last year
• r4d10n / micropython-wch-ch32v307
  MicroPython for WCH CH32V307
  ☆33Updated 2 years ago
• lvgl / lv_port_raspberry_pi_pico_mdk
  An MDK template for Raspberry Pi Pico + LVGL
  ☆30Updated 2 years ago
• sipeed / M1s_BL808_SDK
  M1s(BL808)SDK
  ☆57Updated 2 years ago
• ywaby / keil2sdcc
  convert c51 program to sdcc
  ☆50Updated 3 years ago
• YuzukiHD / Buildroot-YuzukiSBC
  Buildroot Package Mainly for YuzukiHD Devices. Support Allwinner F1C100s/200s V3s V3x D1-H D1s T113 H616 BSP and Mainline
  ☆166Updated last year
• wuxx / USB-HS-Bridge
  ☆81Updated 6 months ago
• arm8686 / FT2232HL-Board
  USB to dual UART / SPI / I2C / JTAG / FIFO / Bit-Bang...
  ☆129Updated 2 years ago
• vllogic / openocd_cmsis-dap_v2
  支持CMSIS-DAP v2接口协议，支持ARM、RISCV、ESP32等目标芯片，详见Wiki及release
  ☆44Updated last month
• CSY-tvgo / Keil-C51-C-to-SDCC-C-Converter
  Convert your Keil C51 C code to SDCC C code in browser. // 在网页中把你的 Keil C51 C 代码转换成 SDCC C 代码。
  ☆26Updated 2 years ago
• DeciHD / allwinner_docs
  Allwinner document collection
  ☆45Updated 5 months ago
• ElectronicCats / DAP-Cat-Programmer
  An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…
  ☆93Updated 6 months ago
• milk-v / duo-manifest
  ☆64Updated last year
• 100askTeam / LCOM
  The LCOM is an easy to use serial communication terminal program (Based on LVGL!) that transmits and receives bytes to practically any de…
  ☆17Updated last year
• diodep / ch55x_dualserial
  CH552 Dual USB to Serial Bridge.
  ☆76Updated 6 months ago
• YuzukiHD / SyterKit
  SyterKit is a baremetal framework, As bootloader, MPU framework, Running on SRAM
  ☆106Updated last week
• SoCXin / PY32F002
  L1 R1 S1: PuyaSemi 24MHz Cortex-M0 MCU (PY32F002A/PY32F003/PY32F030)
  ☆23Updated last year
• jcmvbkbc / linux-xtensa
  Linux port for xtensa architecture. None of these branches are stable.
  ☆152Updated 2 weeks ago
• WeActStudio / WeAct_F411CE-MicroPython
  micropython for stm32f411ce core board
  ☆55Updated 4 years ago
• sophgocommunity / CV180-Duo
  Milk-V Duo is an ultra-compact embedded development platform based on the Sophgo CV1800B chip. It can run Linux and RTOS, 0.2TOPS computi…
  ☆28Updated last year
• junhuanchen / mpfshell-lite
  👾 The lightweight version of the mpfshell is for pure CUI drivers.
  ☆36Updated 3 years ago
• sipeed / RV-Debugger-BL702
  RV-Debugger-BL702 Project, an opensource debugger implement
  ☆183Updated 3 months ago
• RigoLigoRLC / LC2KiCad
  A C++ utility that converts EasyEDA (LCEDA) file to KiCad 5 Documents.
  ☆142Updated last year
• sipeed / Longan-DOC
  Longan RV32 Boards Document
  ☆47Updated 5 years ago
• YuzukiHD / YuzukiNezha-D1s
  YuzukiNezha D1s is a SOM based on Allwinner D1s
  ☆15Updated 3 years ago
• mcauser / micropython
  MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems
  ☆97Updated 4 months ago
• metro94 / FlappyBoard
  A minimum development board for CH32V203G6.
  ☆44Updated 2 years ago
• platformio / platform-intel_mcs51
  Intel MCS-51 (8051): development platform for PlatformIO
  ☆56Updated 4 months ago
• fifteenhex / buildroot_idosom2d01
  Buildroot for ido-som2d01 (and similar SSD20xD) based boards.
  ☆11Updated last year
• wuxx / f1c100s-gpio-tools
  Command-line access to F1C100s GPIO
  ☆24Updated 5 years ago