Alternatives and similar repositories for MKS-SERVO42A

Users that are interested in MKS-SERVO42A are comparing it to the libraries listed below

• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆174Updated 3 years ago
• Dark-Guan / AnanasStepper2.0-hardware
  This is the hardware part of AnanasStepper2.0
  ☆28Updated 8 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆72Updated 5 years ago
• makerbase-mks / MKS-SERVO57B
  MKS SERVO57B is 3d printer closed loop stepper motor NEMA23 MKS SERVO57 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆22Updated 3 years ago
• hackaday3D / marlin_stm32
  stm32 for marlin 1.1.9
  ☆53Updated 5 years ago
• grblHAL / STM32F4xx
  grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)
  ☆114Updated last week
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆34Updated 2 years ago
• markniu / PandaZHU
  3D printer control board based on ESP32,support 8 Driver motors.
  ☆80Updated 2 years ago
• makerbase-mks / MKS-SERVO42C
  MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half…
  ☆184Updated 2 years ago
• makerbase-mks / MKS-DLC
  MKS DLC support grbl firmware, can use Laser mode and CNC mode,support connect MKS TFT24/32/35 and TFT_CNC firmware support lasering and …
  ☆101Updated 3 years ago
• Smoothieware / Smoothieboard2
  Hardware files for the Smoothieboard v2, and extension boards
  ☆58Updated last year
• mstrens / grbl_controller_stm32
  Grbl controller running on stm32F103
  ☆36Updated 6 years ago
• dungjk / grbl-stm32
  An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.
  ☆80Updated 2 years ago
• maplerainresearch / MRR_ESPE
  MRR ESPE 3D printer control board
  ☆37Updated 5 years ago
• technosar / GRBL_STM32
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight ST…
  ☆29Updated 4 years ago
• makerbase-mks / MKS-SERVO57A
  Makerbase MKS SERVO57A NEMA23 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps for Gen_L SGen_L
  ☆26Updated 2 years ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆134Updated 4 years ago
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆96Updated last week
• pvico / grbl32
  CNC controller running on the STM32F103 "Blue Pill" board, build and flash on Mac/Linux
  ☆63Updated 3 years ago
• maplerainresearch / MRR_ESPA
  A basic 3D printer control board based on ESP32
  ☆56Updated 5 years ago
• mstrens / grbl_6axis_on_stm32
  grbl_6axis_on_stm32
  ☆59Updated 5 years ago
• ktand / Armed
  Armed 3D Printer Controller
  ☆17Updated 3 years ago
• hyperstepper / NEMA17-HyperStepper
  Open source hardware - NEMA17 closed-loop stepper motor and driver
  ☆41Updated 6 years ago
• grblHAL / RP2040
  grblHAL driver for RP2040/RP2350 (Pi Pico, Pi Pico2 etc)
  ☆140Updated last week
• uStepper / uStepperS
  ☆54Updated last year
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆149Updated last year
• VIPQualityPost / lemon-pepper-stepper
  simplefoc all-in-one 50W hybrid stepper + bldc driver
  ☆49Updated last year
• grblHAL / STM32F1xx
  grblHAL driver for ST STM32F1xx (Redpill, Bluepill)
  ☆57Updated last week
• makerbase-mks / MKS-StepStick-Driver
  Include MKS TMC2209, MKS TMC2225, MKS TMC2208, MKS TB67S109 and so on
  ☆64Updated 2 years ago
• imrahil / smoothieware-webui
  Better webUI for Smoothieware
  ☆22Updated 8 years ago