Alternatives and similar repositories for rm501

Users that are interested in rm501 are comparing it to the libraries listed below

• Juanduino / S4_CurvePlanner
  4th Order S-curve motion planning in C++, Intended for use w. SimpleFOC. Field Oriented Motor control
  ☆26Updated last year
• PymZoR / S-curve-Planner
  C Library for planning n-th order S-curve motion profiles
  ☆61Updated 8 years ago
• CalvinHsu1223 / LinuxCNC-EtherCAT-HAL-Driver
  LinuxCNC HAL EtherCAT Driver and example files for Panasoniic A5B series servo motors.
  ☆19Updated 10 years ago
• dongilc / MJVESC_circular_v0.3
  Circular type VESC firmware based Motor Controller
  ☆18Updated 6 years ago
• mjbots / mjmech
  ☆77Updated 5 years ago
• CentroEPiaggio / IMAGObot
  Robotic platform for in situ bioprinting based on LinuxCNC
  ☆15Updated 2 years ago
• grotius-cnc / hal-core
  cnc and robot realtime controller. runs on a hal kernel module.
  ☆49Updated 3 years ago
• DizzyRobot / DirectServo
  Controller that drives BLDC motor as servo
  ☆74Updated 6 years ago
• owennewo / simplefoc_skateboard_g431b
  ☆30Updated 5 years ago
• ThotAlion / BLDC-design-help
  Tests on BLCD controller to understand robotic articulation design
  ☆16Updated 4 years ago
• open-bldc / open-bldc-csim
  Open-BLDC brushless motor C simulator
  ☆23Updated 13 years ago
• wiciu15 / servo2
  Servo inverter for 3-phase AC motor with/out encoder feedback
  ☆27Updated 6 months ago
• koppi / mk
  🤖 My LinuxCNC / Machinekit and EtherCAT notes.
  ☆59Updated 6 months ago
• PCrnjak / S-Drive-Firmware
  S_Drive is small bldc driver based on L6234 Three phase motor driver.
  ☆43Updated last year
• DieBieEngineering / DieBieSlave-Firmware-Nunchuck
  ☆41Updated 8 years ago
• grotius-cnc / hal_trajectory
  Trajectory example
  ☆15Updated 4 years ago
• bgkatz / motor-modeling
  ☆59Updated 7 years ago
• cvra / motor-control-board
  DC Motor Controller with CAN Interface. CC-BY 4.0
  ☆13Updated 7 years ago
• open-bldc / open-bldc-pysim
  Open-BLDC python simulator
  ☆34Updated 2 years ago
• jkirsons / BLDC-Driver-IFX007T
  ☆25Updated 4 years ago
• GraniteDevices / SimpleMotionV2
  SimpleMotion V2 library
  ☆48Updated 2 years ago
• JorgeMaker / NautilusController
  A BLDC controller developed (HardWare + FirmWare) using SimpleFOC that is aimed to be used as a robotic actuator.
  ☆15Updated 2 years ago
• mythagel / nc_tools
  A collection of composable CNC/CAM GCode tools
  ☆22Updated 3 years ago
• sittner / ec-debianize
  EtherCAT-Master debianization
  ☆33Updated 6 years ago
• WRidder / MotionProfileGenerator
  ☆48Updated 10 years ago
• ExcessiveOverkill / universal-IRC-1
  Universal Industrial Robot Controller. Based on using LinuxCNC in combination with Odrives to create a full control system.
  ☆116Updated 3 years ago
• mjbots / pi3hat
  ☆43Updated 2 weeks ago
• mjbots / fdcanusb
  fdcanusb adapter
  ☆37Updated 3 weeks ago
• aschiffler / linuxcnc-sercos3
  Sercos Softmaster for MachineKit
  ☆17Updated 8 years ago
• grotius-cnc / qt_c_linuxcnc_interface_gui
  Linuxcnc interface gui based on halcommands and emc-nml messages, can read and visualise gcode
  ☆14Updated 5 years ago