Alternatives and similar repositories for t12-958

Users that are interested in t12-958 are comparing it to the libraries listed below

• Canonius / JBC_Soldering_Station
  Dual JBC T245 compatible 300W soldering station
  ☆65Updated 4 years ago
• Muny / DIY-JBC-T245-Station
  A DIY JBC T245 soldering iron station.
  ☆44Updated 7 years ago
• avandalen / Spotwelder-controller
  ☆13Updated 5 years ago
• Aus3D / PicoPrint
  An STM32F4-based 3D printer control board, designed to be fast, quiet, and compact.
  ☆22Updated 6 years ago
• MatthiasElectronic / AWG_DHO8-900
  artificial waveform generator / function generator for DHO800 and DHO900 series (AWG/AFG)
  ☆119Updated 3 months ago
• soguklehim / hot-air-controller
  Hot air rework controller for generic 858D / 8586 / 8858 / 852 / 878 / 858 hot air guns from China.
  ☆31Updated 5 years ago
• c0d3z3r0 / aixun_t3a_rev
  AIXUN T3A Reverse Engineering
  ☆46Updated last year
• sfrwmaker / T12-JBC-rework-station
  ☆17Updated 2 months ago
• tdjastrzebski / All-Purpose-Power-Micro-Controller
  General purpose power controller, capable of driving soldering irons using different voltages and probe types.
  ☆40Updated 2 years ago
• sfrwmaker / TFT_Rework_station
  Soldering and rework station with TFT ili9341 display absed on stm32
  ☆23Updated last year
• akshaybaweja / component-tester-oled
  Component Tester in a Keychain
  ☆75Updated 3 years ago
• timothyjager / JBC-Soldering-Controller
  A DIY soldering controller for JBC T245 handle & C245 tips
  ☆42Updated 2 years ago
• 0xPIT / Air858
  Simplified and optimized replacement controller for the low-cost W.E.P. 858D+ Hot Air Soldering Station
  ☆14Updated 9 years ago
• Apehaenger / Another-HotPlate-Firmware
  A feature-rich reflow Hot-Plate firmware i.e. usable for "Tim's Hot Plate" (https://www.instructables.com/Tims-Hot-Plate/)
  ☆28Updated 8 months ago
• wagiminator / ADuM3160-USB-Isolator
  2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support
  ☆67Updated 3 years ago
• wagiminator / CH32V003-MacroPad-plus
  Programmable MacroPad with Rotary Encoder and NeoPixels
  ☆15Updated last year
• wntrblm / jellyfish-and-starfish
  ☆110Updated 3 years ago
• foldvarid93 / JBC_SolderingStation
  JBC_SolderingStation
  ☆94Updated 2 years ago
• warehouseElc / XT-05_soldering_station_kit
  5 in 1 Soldering Station based on atmega328p
  ☆10Updated 3 years ago
• avandalen / PCB-Spotwelder-Controller
  ☆11Updated 4 years ago
• polihedron / DIY-Reflow-Oven
  DIY Reflow Oven, mcu: STM32F103 dev board, Display: Nextion Basic 3.5", PID controller.
  ☆42Updated 3 years ago
• wagiminator / ATtiny85-USB-C-Tester
  Simple USB-C Power Delivery Tester
  ☆40Updated 3 years ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆44Updated 4 years ago
• wagiminator / ATtiny13-TinySolder
  T12 Quick Heating Soldering Station
  ☆93Updated 3 years ago
• dreamcat4 / t12-t245-controllers-docs
  ☆111Updated last year
• ivandevel / DSS-80E
  DSS-80E Digital Soldering Station
  ☆11Updated 3 years ago
• puzrin / dispenser
  SMT solder paste and flux dispenser
  ☆39Updated 4 years ago
• TheKikGen / stm32-tkg-hid-bootloader
  A HID driverless bootloader and flash tool companion for the STM32F1 line
  ☆40Updated 10 months ago
• howie-j / opensolder
  Fully open source JBC T245-compatible soldering station
  ☆35Updated 2 years ago
• EmanuelBender / HEX_POD
  Multi-sensor intelligent environmental Monitor
  ☆18Updated last year