knicholson32 / stratux_ahrs
AHRS Display for the Raspberry pi powered Stratux software
☆20Updated 2 years ago
Alternatives and similar repositories for stratux_ahrs:
Users that are interested in stratux_ahrs are comparing it to the libraries listed below
- Display for Stratux Europe Edition, can run standalone☆39Updated this week
- GDL 90 decode/encode tools and libraries☆53Updated 2 months ago
- Open design for a hardware and software 978MHz ADS-B receiver. Capable of decoding FIS-B weather, text, and NEXRAD data.☆12Updated 11 years ago
- Build stratux from scratch on your Raspberry Pi (2/3/Zero W) with the latest dump1090-fa and wiringPi.☆8Updated 3 years ago
- Engine monitoring for experimental aircraft on your tablet for about $150☆24Updated 6 years ago
- UAT (ADS-B 978) test signal generator☆47Updated 4 years ago
- A Raspberry Pi knock off of the Dynon D2 artificial horizon that leverages the stratux project.☆21Updated 9 years ago
- Aviation weather and traffic receiver based on RTL-SDR.☆7Updated 6 years ago
- A simple VOR receiver☆58Updated 6 months ago
- CanFly public display code☆25Updated 7 months ago
- OnSpeed Gen2 - AOA aural indicator for flying "On Speed" with onboard sensors☆26Updated 9 months ago
- Expermental Aircraft Glass Cockpit☆22Updated 5 years ago
- Stratux is an open-source, DIY avionics system offering affordable ADS-B and flight data, enhancing situational awareness for general avi…☆180Updated this week
- A clone of DUMP978☆11Updated 2 years ago
- Multifunctional, compatible DIY general aviation proximity awareness system☆26Updated this week
- nRF905 single-chip radio transceiver demodulator + FLARM protocol decoder☆56Updated 6 years ago
- Stratux Europe on a Pi3, Pi4, Pi5 or Pi Zero 2 W based on a fresh 64bit RasPiOS Image☆20Updated last week
- Arduino software for AHRS module☆16Updated 3 years ago
- Arduino port of the dAISy AIS project for si446x☆17Updated 6 years ago
- Arduino library for DRA818 VHF/UHF Band Voice Transceiver☆45Updated last year
- Electronic Flight Information System in Python☆62Updated 3 weeks ago
- Heads Up Display for use with Stratux. Designed for reflective HUD screens, intended for traffic call outs.☆126Updated last week
- A demodulator written in C to decode IQ data from the 137.35Mhz/137.77Mhz telemetry beacons from NOAA-15, NOAA-18, and NOAA-19☆56Updated 4 years ago
- APRS Tracker☆40Updated 8 years ago
- Flight Information Glass Panel for Tablet and Smartphone☆14Updated 3 years ago
- This project will have the files for a Cube Sat Telemetry system Using Raspberry Pi Transmitter Board☆18Updated 7 years ago
- OGN Tracker implementation on ESP32 devices☆58Updated last year
- 1090ES ADS-B Out Add-on☆150Updated 4 years ago
- ESP32-based LoRa ground station☆30Updated 4 years ago
- An alternative method for installing Stratux on your board's stock Linux OS.☆13Updated 7 years ago