karrika / Otaku-flashLinks
A single game flash card for Atari 2600, Atari 7800 and Atari 2600+
☆17Updated 5 months ago
Alternatives and similar repositories for Otaku-flash
Users that are interested in Otaku-flash are comparing it to the libraries listed below
Sorting:
- Firmware for PlusCart and UnoCart☆31Updated 2 months ago
- Flashcart for Atari 2600 and Atari 7800 based on Pico "Purple" clone☆22Updated 5 months ago
- 4Mb expansion for OMEGA MSX2+ HOME COMPUTER☆16Updated 3 years ago
- Sega flash multicart for SC-3000, SG-1000 and Mark III based on Pico Clone☆27Updated 9 months ago
- Multi-Cartridge for the Atari 2600+☆16Updated last year
- Adapter so that Sega Mega Drive (Sega Genesis in North America) gamepads can safely be used with the MSX line of computers.☆12Updated 2 years ago
- Firmware for Robin Edwards' UnoCart☆57Updated last year
- A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also…☆43Updated last year
- Safely connect your Sega Mega Drive/Genesis controllers to your Commodore 64 or Amiga☆24Updated 2 years ago
- ☆14Updated 3 years ago
- A wavetable module powered by a Raspberry Pi Zero 2W and mt32-pi☆57Updated 3 months ago
- A little PCB to buld a SCART cable for console and old computers☆22Updated last year
- New PiRTO multicart for Intellivision, now based on Pico clone☆35Updated 2 months ago
- This repository contains Gerbers and part's list for an ATARI 2600 clone board.☆17Updated 5 years ago
- X68000 RAM Expansion☆37Updated 3 years ago
- MT32-PI.EXE/MT32-PI.TTP/mt32-pi-ctl is a control program for the mt32-pi MIDI synthesizer available for DOS PCs, Atari ST and Amiga compu…☆51Updated last year
- Replace 82s126/82s129/82s131 PROMs with (E)EPROMs☆11Updated 9 months ago
- A ColecoVision clone☆18Updated 4 months ago
- Flashcart for Videopac / Odyssey 2 based on Wilco2009 Videopac-microSD card project☆27Updated 3 months ago
- F4 register and FMPAC combo board for MSX☆18Updated 2 months ago
- Colecovision flash multicart based on Pico clone☆41Updated 9 months ago
- A homebrew Sega SG-1000, with an eye towards SC-3000 compatibility☆26Updated 5 months ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆54Updated 11 months ago
- TangNano 20K cartridge for MSX computers☆58Updated 2 months ago
- RGB to SVideo converter for Amiga computers☆11Updated last year
- ☆10Updated 2 years ago
- Open Source Hardware for Vintage Computers☆27Updated 10 months ago
- Playstation to Commodore Amiga/CD32 Controller Adapter☆65Updated 4 years ago
- Adapt a floppy cable meant to use an edge connector to use a 34-pin female pin connector instead.☆16Updated 5 months ago
- Emulate ROMs and Floppy images in MSX☆42Updated last year