Alternatives and similar repositories for Serial-Expansion-Card:

Users that are interested in Serial-Expansion-Card are comparing it to the libraries listed below

• boredom101 / dev-expansion-card
  Framework Laptop Expansion Card
  ☆24Updated 3 years ago
• bluepylons / USB-C-3-way-splitter
  A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources
  ☆31Updated 7 months ago
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated 2 years ago
• thepolymatt / 701c.org
  Open source assets for the 701C.ORG project.
  ☆65Updated last month
• solderparty / rp2xxx_stamp_footprints
  ☆73Updated 2 months ago
• smaroukis / usb-sleuth
  USB cable continuity tester ++
  ☆54Updated 11 months ago
• Matthias-Wandel / caliper-interface
  Connecting cheap digital calipers to Raspberry Pi and decode readings
  ☆116Updated last month
• Mew463 / esp32-caliper
  ☆50Updated 5 months ago
• Mmessiter / LockDownRadioControl
  LockDownRadioControl
  ☆42Updated this week
• atc1441 / ATC_stc_solder_iron
  Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based
  ☆50Updated 2 years ago
• jfedor2 / magellan-spacemouse
  Adapter to use RS-232 Magellan/SpaceMouse with modern software
  ☆41Updated 2 years ago
• mountainmannm / Bolt-Industries
  The Bolt Industries repo contains the firmware for the Pico 87 mechanical keyboard and Pico 14 Macro Pad..
  ☆43Updated 3 weeks ago
• oxullo / uctester
  Ultimate Continuity tester
  ☆27Updated 4 years ago
• ZoidTechnology / PCIce
  A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.
  ☆87Updated 8 months ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆57Updated 4 months ago
• ccadic / TI92-revive
  Reviing the TI92 calculator with a new KICAD PCB and a new 4 inch display
  ☆40Updated 2 years ago
• TobleMiner / oled-nametag
  A ESP32-based OLED nametag
  ☆51Updated last year
• EvanKrall / pipad
  A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.
  ☆58Updated last year
• j-zero / orsala_hack
  Alternative firmware for IKEA ORSALA lamp
  ☆58Updated 4 years ago
• MisterHW / LEDCard
  Li-Ion-Powered Macro Ring Light For Your Wallet
  ☆52Updated 2 years ago
• AndersBNielsen / Universal-Serial-Adapter
  Hackable USB-C UART RS232 Adapter
  ☆30Updated 3 months ago
• JosueAGtz / cistercianDisplay
  31 segments digital Cistercian Display with constant current serial to parallel driver.
  ☆23Updated 2 years ago
• witnessmenow / ts100-flex-c-friend
  Info and documentation for the TS100 Flex-C-Friend, an external add-on for TS-100 for adding USB-C PD
  ☆63Updated 4 years ago
• Envious-Data / EnvOpenPico
  An open source RP2040 MCU Board Family
  ☆149Updated 5 months ago
• sitronlabs / Solder-Ninja-Pen-Hardware
  Enclosure and Circuit Board for the Solder Ninja Pen
  ☆34Updated last year
• Pakequis / ProtoConn
  A prototype board with connectors for electronic testing and development.
  ☆58Updated 2 weeks ago
• BenMakesEverything / 20-Segment-Display
  3D Printed 20-Segment Display
  ☆55Updated 3 months ago
• RainbowLabsDE / PDBrick
  A 1.7kW USB-C PD power supply
  ☆101Updated last year
• c0pperdragon / HotPlate
  ☆31Updated 11 months ago
• inputlabs / alpakka_case
  ☆79Updated 2 weeks ago