jpleger / hcs301_programming
HCS301 Keeloq Programming Example
☆26Updated 4 years ago
Alternatives and similar repositories for hcs301_programming:
Users that are interested in hcs301_programming are comparing it to the libraries listed below
- STM32 HAL library for reading code from HCS301 433Mhz Keeloq☆19Updated 4 years ago
- Programmer for HCS301 EEPROM Code Hopping using Arduino☆10Updated 4 months ago
- An open source application for programming HCS EEPROM Code Hopping. Support keeloq key generation from manufacturer code for Simple, Norm…☆18Updated 4 months ago
- STM32 HAL library for reading and sending code for Radio frequency (RF) barrier (Came, Nice) simple code 12, 24 bit and HCS301 with keelo…☆28Updated 5 years ago
- Segger Embedded Studio project for building & debugging Flipper Zero firmware.☆40Updated 2 years ago
- TLSR826x programmator via COM port☆35Updated 4 years ago
- Blog about my journey investigation uhf-rfid with arduino and cc1101☆44Updated 2 years ago
- A remote control clone of an RC-switch using Arduino Nano and a TI CC1101 module☆28Updated 5 years ago
- CC1101 Low-Power Sub-1 GHz RF Transceiver driver for esp-idf☆52Updated last week
- doorphone keys copyer☆21Updated 6 years ago
- Arduino sketch, which helps detecting the connections of the I2C interface and prints info available from the SMB (SmartBatteryModule) la…☆116Updated 3 months ago
- HydraFW dedicated to HydraBus v1 / HydraNFC Shield v2☆43Updated 7 months ago
- Atmega328 Bootloader for wireless (OTA) code updates, using the CC1101 RF chip.☆18Updated last year
- C implementation of KeeLoq algorithm, equipped with a function to generate algebraic equations of KeeLoq over GF(2)☆90Updated 3 years ago
- Remote Control for barriers based on Arduino☆36Updated 2 years ago
- Fork of https://gitlab.zapb.de/zapb/stm32f1-firmware-extractor☆83Updated 3 years ago
- With this tool, you can register entries of the CC1101 during operation read and change. You can switch to send or receive. Set the trans…☆39Updated 3 years ago
- Arduino RF rolling code keeloq receiver☆9Updated 3 months ago
- Arduino support for SAM D|L|C (M0+ and M4F). It adds support for new devices like the D51, SAMR34, L21, C21, and D11. It also adds new cl…☆11Updated 9 months ago
- Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably…☆43Updated 11 months ago
- Moddings for Proxmark3☆25Updated 11 months ago
- KeeLoQ compatible Transmitter using ATTiny85☆12Updated last year
- ☆95Updated 3 years ago
- Alternative programmer for TLSR8269☆65Updated 7 months ago
- Simple packet radio on ATMEGA328p (arduino) and CC1101 chip - PC to PC communicator☆21Updated 3 years ago
- ☆100Updated 5 years ago
- POCSAG transmiter with RF7021SE☆25Updated 2 years ago
- Firmware for the cheapest can sniffer☆35Updated 8 months ago
- ☆44Updated 3 years ago