jockel71 / RGB_HDMI_A600
☆21Updated 3 years ago
Alternatives and similar repositories for RGB_HDMI_A600:
Users that are interested in RGB_HDMI_A600 are comparing it to the libraries listed below
- 4 MB Fast RAM Expansion for the Commodore Amiga 600☆39Updated 4 years ago
- SDBox-v2 for Amiga, compatible with the new updated card-detect firmware☆44Updated 3 years ago
- Amiga 1200 keyboard MPU drop-in replacement pcb☆37Updated last year
- A Gotek based compact PCB for Amiga☆44Updated last year
- Amiga 500 8MB FastRAM and IDE interface☆33Updated 8 months ago
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆25Updated 8 months ago
- ☆26Updated 2 years ago
- Adapter to fit the older 1MB Agnus to the A500+☆18Updated 3 years ago
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated 2 years ago
- The Ultimate Amiga RGB to VGA filtered buffered let-those.ugly-barrels-away adapter☆28Updated 3 weeks ago
- Open Hardware RTC module for the Amiga 1200.☆24Updated 6 years ago
- Hardware design of a (up to) 2MB cartridge for the Commodore 264 line of computers (Commodore 16, 116 and plus/4)☆27Updated 2 months ago
- This is a Kernal Adapter/Switch for the Commodore C64, ASSY250469 (short board).☆30Updated 2 years ago
- Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000☆17Updated 2 years ago
- Wanted a joystick switcher for my Commodore 64, so I built one by adapting C64 Mega Switcher for use with Atari-style joysticks. Supports…☆20Updated 2 years ago
- VIC-20 Final Expansion 3 Rev 11 Cartridge☆19Updated 3 years ago
- ☆59Updated 3 years ago
- Improved design attempt for Amiga 500 in socket 68000 Accelerator, FastRAM and IDE Interface☆53Updated 8 months ago
- Replace the old 44256 DRAM chips on your A500 with newer EDO memory☆2Updated 5 years ago
- ☆34Updated 10 months ago
- Mechanical keyboard for Amiga 500 and 1200, using Cherry MX compatible switches.☆48Updated last year
- Fancy Kickstart Switcher for A500-A600-A1200-A4000☆18Updated 6 months ago
- This is a PCB based on the Steve White schematic. You just plug on the top of a RPI 3 and you have a fully working 1541 disk emulator :)☆18Updated 5 years ago
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆3Updated 5 years ago
- A case for the Versa64Cart☆27Updated 5 years ago
- An SMD verson of the great Amiga 500☆67Updated 11 months ago
- Wireless connectivity for your Amiga☆16Updated 2 years ago
- MOS 6520 PIA / MOS 6522 VIA / MOS 6526/8520/8521 CIA replacement☆32Updated last month
- Converts PC floppy drive interface to Amiga/Shugart bus interface. Now also supports the Atari ST/TT.☆49Updated 3 years ago
- A remake of the RA5-512K expansion memory for the Amiga 500 made in diptrace☆18Updated 5 years ago