je310 / microRobotsROS
Repository of code for the micro robots for education project. Provides a ros interface for the small robots.
☆15Updated 8 years ago
Alternatives and similar repositories for microRobotsROS:
Users that are interested in microRobotsROS are comparing it to the libraries listed below
- MORPH : Modular Open Robotics Platform for Hackers☆45Updated 6 years ago
- Project aiming to transform regular hobby servos into smart ones by replacing their original boards.☆22Updated 8 years ago
- Simple ESP32-Arduino library to operate LX-16A serial servos☆24Updated last year
- Python package for Tau Lidar Camera application☆28Updated 3 years ago
- ESP8266 library for UBTech Alpha 1S servo☆22Updated 6 years ago
- An arduino library for running SimonK (400 Hz refresh rate) ESCs with Arduino - Based on the standard Servo library☆13Updated 6 years ago
- Affordable and open-source LIDAR based on three VL53L0X ranging sensor.☆68Updated 6 years ago
- ☆17Updated 8 years ago
- ☆11Updated 2 months ago
- This motor driver is designed to be interfaced from a host microcontroller by I2C and be able to control the motor with a PID autonomousl…☆33Updated 2 years ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 5 years ago
- ☆12Updated 9 years ago
- Wangsamas firmware can be used for cartesian, delta and SCARA 3d printers and can be modified for plotter, CNC and laser.☆24Updated 7 years ago
- This is a four-legged robot that learns to walk with Q-Learning and an ANN.☆49Updated 8 years ago
- www.firepick.org GitHub☆45Updated 9 years ago
- OpenServo Version 4☆20Updated 12 years ago
- Low cost servo drive for small CNC machinery☆54Updated 8 years ago
- Miniature closed-loop controller for brushless DC motors☆28Updated 7 months ago
- Open-source robot controller platform☆23Updated 10 years ago
- DC Motor Controller with CAN Interface. CC-BY 4.0☆13Updated 6 years ago
- Embedded software (firmware) for the laser system and components, including configuration files☆27Updated last year
- ☆19Updated 8 years ago
- It is compatible with standard stepper motor diver, cnc or GRBL shield, direct replacement of X-Y stepper motors.☆27Updated 5 years ago
- Open-source DIY parametric robot☆61Updated 5 years ago
- ☆34Updated 2 years ago
- Arduino and Processing code for an A3080 or ADNS3080 optical flow sensor☆45Updated 2 years ago
- ☆28Updated 7 years ago
- PCB files for Adafruit PyGamer☆11Updated last year
- Mechaduino derivative which drives up to 10A, drawn using KiCad☆29Updated 5 years ago
- TMC2209 4 Acis Grbl_ESP32 Controller☆19Updated 3 years ago