idlehandsdev / thePIDDYBOTLinks
PIDDYBOT is an Open Source Balancing Robot with the aim of teaching PID control.
☆43Updated 7 years ago
Alternatives and similar repositories for thePIDDYBOT
Users that are interested in thePIDDYBOT are comparing it to the libraries listed below
Sorting:
- ESP8266 with 3.5" KeDei LCD module☆43Updated 8 years ago
- Segway-like robot implemented on ESP8266☆118Updated 3 years ago
- Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd☆57Updated 3 years ago
- Version of the ESP8266 RGB Matrix that is one single board for the 64x32 display.☆38Updated 5 years ago
- Affordable and open-source LIDAR based on three VL53L0X ranging sensor.☆68Updated 7 years ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆82Updated 7 years ago
- Creates an access point and allows the user to change the name and password remotely☆39Updated 6 years ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 5 years ago
- ESP32_CAM meets Etch-A-Sketch => Etch-a-Selfie☆12Updated 6 years ago
- DIY outdoor solar harvester.☆23Updated 5 years ago
- ☆29Updated 6 years ago
- Demo for working with a camera on ESP32☆19Updated 6 years ago
- ☆19Updated 8 years ago
- ESP8266 Oled Display☆86Updated 9 years ago
- This repository includes the code for my RGB Time Fountain project. Video of the project available at: https://youtu.be/LqMFiVkvxQw☆62Updated 7 years ago
- ☆24Updated 9 years ago
- An ESP8266 based clock intended for the bedroom. It uses neopixels to light one of 12 segments giving the hour and approximate minutes, …☆19Updated 8 years ago
- Open Source Turtle Robot☆81Updated last year
- WakeUp Alarm based on ESP32☆44Updated 6 years ago
- CJMCU-531 and ESP32 Web Demo interfacing to a VL53L1X IR time-of-flight sensor☆56Updated 3 years ago
- Neopixel Joints, millable on the Othermill☆27Updated 8 years ago
- Stepper motor controller based on FreeRTOS for the ESP8266.☆64Updated 8 years ago
- Arduino Serial Command Tool☆66Updated 7 years ago
- ☆55Updated 7 years ago
- Sparklines 📉📈 for ESP8266, ESP32 – Should work with other Arduino-supported controllers☆96Updated 3 years ago
- IoTuz driver for ESP32 based LCA 2017 IoTuz board, also can be used as a demo on an espressif WROVER☆30Updated 7 years ago
- M5Stack Thermal Camera with AMG8833 thermal sensor. The connection between M5Stack & the sensor is I2C☆62Updated 7 years ago
- A self-contained microcontroller, battery, and power management system that fits in your pocket.☆44Updated 4 years ago
- A cheaper version of MiniKame robot☆16Updated 9 years ago
- ☆53Updated 4 years ago