ic1414 / esp_trans_v2Links
☆21Updated 7 months ago
Alternatives and similar repositories for esp_trans_v2
Users that are interested in esp_trans_v2 are comparing it to the libraries listed below
Sorting:
- 这个是萝莉3航模遥控器的开源项目，包含硬件电路及固件源码，原创作者“我爱萝丽爱萝丽”，原发于“模型中国”论坛，后来“模型中国”论坛消亡，作者遂转战于“模友之吧”，虽然萝莉4代从提出到现在已经有1年半了（2017年12月31日提出萝莉4代至今），但由于4代正式版一直难产当中，…☆101Updated 6 years ago
- PX4 Autopilot Software☆59Updated 2 weeks ago
- quad☆74Updated 7 months ago
- 这是菠萝狗四足机器人开源项目的分支，菠萝无刷系列开源四足机器人的专门仓库☆94Updated 3 years ago
- ☆82Updated 5 years ago
- ppmESP8266☆12Updated 2 years ago
- 使用STM32F103C8T6最小系统板，将8路PWM转换为PPM信号输出☆10Updated 4 years ago
- 这是由一块迷你、带OV2640、双DRV8833驱动、Type-C接口、PSRAM的ESP32-Pico-D4开发板驱动的麦克纳姆轮小车。☆66Updated 2 years ago
- an open source esc driver, somewhat like BLHeli, but coded in C++ and based on 32bit mcu, layer design and module design is applied in th…☆41Updated last year
- balance car use ESP32 and BLDC drived by simplefoc☆73Updated 3 years ago
- ☆31Updated 2 years ago
- 该驱动板支持：霍尔无刷驱动、感应电动势无刷驱动、simpleFOC、直流减速电机改舵机，多样性功能，性价比高☆59Updated 4 years ago
- atbetaflight 是一个基于betaflight 4.3 移植至Artery Tek AT32F435/7 的一个分支。这是我们的第一个尝试☆156Updated last year
- 51版六足机器人控制器（多路舵机控制器）☆49Updated 4 years ago
- 基于STC15W408的富斯二代接收机☆39Updated 5 years ago
- A port of Grbl CNC Firmware for ESP32☆41Updated 4 years ago
- K210 四层板 0603 PCB工程☆53Updated 5 years ago
- ☆20Updated 4 months ago
- 基于betaflight 4.3 移植至Artery Tek AT32F435/7☆17Updated 3 months ago
- sbus解码库☆24Updated 6 years ago
- A SBC(Single Board Computer) to run autopilot firmware on linux☆33Updated last year
- J20航模遥控器基础版☆178Updated 4 years ago
- B站 极客车仔 开源FOC☆36Updated 2 years ago
- 这是一个用于学习foc而设计的开发板☆31Updated 7 months ago
- Open-Smartwatch手表，基于LVGL8.0☆57Updated last year
- Ground Station of ESP-VTX. Rewrite by Rust.☆20Updated last year
- 一个基于ESP32-S3-WROOM-1模组的机器视觉模块，可以刷OPENMV。☆62Updated 2 years ago
- 双路FOC驱动器☆30Updated 3 years ago
- ☆17Updated 3 years ago
- ESP32-C3 LuatOS Board TFT Video Cast☆21Updated 3 years ago