iboguslavsky / pwm-sunxi-opi0Links
PWM driver for H2+ Sunxi SoC
☆15Updated 6 years ago
Alternatives and similar repositories for pwm-sunxi-opi0
Users that are interested in pwm-sunxi-opi0 are comparing it to the libraries listed below
Sorting:
- https://bitbucket.org/jpcgt/flatcam☆83Updated 6 years ago
- Universal firmware for CNC machines☆18Updated 9 years ago
- Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...☆72Updated 5 years ago
- copy of the same project from sourceforge☆78Updated 4 years ago
- WS2812 DMA library with low RAM needs. Up to 16 paralel outputs and thousands of LEDs on each of them☆62Updated 3 years ago
- Utility for plotting array data from MCU RAM☆28Updated 7 months ago
- Buildroot for the LicheePi Zero board☆34Updated 7 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆88Updated 4 years ago
- HTTP server with WebSockets for ESP8266☆72Updated 8 years ago
- Cross-platform Arduino timer API☆35Updated 4 years ago
- ESP8266 firmware that implements the SWIM protocol for debug access / flashing of STM8 devices☆92Updated 10 months ago
- Generic implementation of Arduino for STM32 boards☆122Updated 3 years ago
- A Qt RepRap gcode sender/host controller☆49Updated 6 years ago
- Cortex M3 hardware descriptions, library software, and some applications for ST and GD F103 platforms☆39Updated 7 years ago
- Implement Texas flash protocol for CCxxxx chips.☆52Updated 6 years ago
- Library for STM8 microcontroller☆19Updated 10 years ago
- STM8S Standard Peripheral Library Ported to SDCC for multiple STM8 targets☆70Updated 2 years ago
- SPI Slave for ESP8266 module☆106Updated 4 years ago
- A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec☆74Updated 5 years ago
- ☆29Updated 6 years ago
- ESP8266 altium lib☆78Updated 2 years ago
- A Marlin FW for the ST Microelectronics 3D printer board STEVAL-3DP001V1☆106Updated 8 years ago
- AVR-GCC plugin that puts vtbls into program memory☆30Updated 5 years ago
- SMT solder paste and flux dispenser☆38Updated 4 years ago
- gc2035 for H3 (320x240|640x480|800x600|1600x1200)☆30Updated 9 years ago
- PICnc V2 is a PIC32 based hardware step generator board that is designed for MachineKit☆29Updated 9 years ago
- PSoc5 Port of Grbl CNC Controller☆36Updated 8 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆57Updated 11 years ago
- Serial bootloader for STM8 microcontrollers☆97Updated 2 months ago
- CNC controller running on the STM32F103 "Blue Pill" board, build and flash on Mac/Linux☆63Updated 3 years ago