Alternatives and similar repositories for tmc2660-breakout:

Users that are interested in tmc2660-breakout are comparing it to the libraries listed below

• clementleger / Smoothieware-STM32
  [DEPRECATED] Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆38Updated 9 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆57Updated 5 years ago
• bobc / bobc_hardware
  Various hardware projects
  ☆86Updated 7 years ago
• issus / NEMA8-Juki-Tool-Changer
  Pick and Place tool changer nozzle to hold Juki 500 series nozzles on a NEMA8 hollow shaft motor
  ☆28Updated 8 years ago
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 4 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 5 years ago
• cdsteinkuehler / bobc_hardware
  CRAMPS - A Cape version of the RAMPS-FD design for 3D printing
  ☆45Updated 5 years ago
• BitLabProjects / Smoothieware-STM32
  Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆14Updated 8 years ago
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆19Updated 7 years ago
• Scavenger18 / RepoPNP
  Files concering PAIND PNP Feeder
  ☆23Updated 6 years ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 9 years ago
• paulusjacobus / SuperGerbil
  STM32 driven ARM Grbl firmware
  ☆23Updated 5 years ago
• SebG3D / TapePuller
  tape puller/remover for 0816 automatic feeder
  ☆21Updated 5 years ago
• phschoen / unisolder
  universal soldering controller - a copy of http://dangerousprototypes.com/forum/viewtopic.php?t=7218
  ☆29Updated 5 years ago
• hackaday3D / marlin_stm32
  stm32 for marlin 1.1.9
  ☆53Updated 5 years ago
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆34Updated 2 years ago
• xboxhacker / OpenFeeder
  OpenSource feeder for DIY and OpenPNP community
  ☆32Updated 9 years ago
• pscrespo / Morpheus-STM32
  A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
  ☆73Updated 4 years ago
• Cohesion3D / Cohesion3D-ReMix
  ☆13Updated 8 years ago
• ArduinoHannover / ZPB30A1_Firmware
  Open-Source firmware for the ZPB30A1 electronic load (WIP)
  ☆50Updated 6 years ago
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• ChristianLerche / 3DPCB
  3DPCB DRV8825 files - KiCAD
  ☆9Updated 8 years ago
• osresearch / servostep
  Closed loop servo control for stepper motors
  ☆10Updated 9 years ago
• geniekobayashi / juki_nozzle_changer
  OpenPnP project
  ☆17Updated 8 years ago
• richardklingler / openpnp
  My pick and place machine controlled by the great OpenPNP software.
  ☆74Updated 3 years ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆133Updated 4 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• mariolukas / openexposer
  Open Exposer - Hardware, Slicer, Host, Firmware
  ☆67Updated 8 years ago
• hasenbanck / remram
  32bit STM32F7 based 3D printing controller using TMC2130 stepper driver
  ☆40Updated 4 years ago
• dasaki / nanoReflowController
  Reflow Oven Controller. See below for more information.
  ☆79Updated 5 years ago