Alternatives and similar repositories for PL1

Users that are interested in PL1 are comparing it to the libraries listed below

• IoTDevicesCH / LoraMidiAtmega1284P
  Small Lora(WAN) board using an Atmega1284P chip and RFM95 module
  ☆19Updated last year
• Danny24 / smart_motor_driver
  This motor driver is designed to be interfaced from a host microcontroller by I2C and be able to control the motor with a PID autonomousl…
  ☆33Updated 2 years ago
• wagiminator / SAMD-Development-Boards
  Collection of SAMD Development Boards, Programmers, Tools and Firmware
  ☆29Updated 3 years ago
• LowPowerLab / CurrentRanger
  Precision auto-ranging current meter (ammeter)
  ☆103Updated last week
• sparkfun / Power_Delivery_Board-USB-C
  ☆24Updated 5 years ago
• OLIMEX / ESP32-S2-DevKit-LiPo
  ESP32-S2 IoT developement board with WiFi, USB programmer, RGB LED, LiPo charger, GPIOs
  ☆16Updated 4 years ago
• ceech / BQ76920-BMS
  ☆36Updated 6 years ago
• OpenSprinkler / OSBeeWiFi-Hardware
  ☆11Updated 2 years ago
• shridattdudhat / Raspberry-Pi-Compute-Module-4-Eagle-Footprint
  New Raspberry Pi Compute Module 4 Eagle Library and 3D Models
  ☆38Updated 2 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆25Updated 6 years ago
• sonyhome / SerialMenu
  An Arduino library to easily create menus on the serial console.
  ☆26Updated 5 years ago
• slimelec / ollie-hw
  ☆71Updated 3 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• RoboticsBrno / RB0005-UniversalStepDown
  Universal step-down module
  ☆26Updated 4 years ago
• s54mtb / LoRaDunchy
  Lora board with Arduino nano compatibile pinout and simple battery management
  ☆35Updated 6 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆13Updated 5 years ago
• sbelectronics / ups
  pi ups project
  ☆46Updated 4 years ago
• Megunolink / MLP
  Arduino library for sending data to MegunoLink visualisers and useful components
  ☆46Updated 6 months ago
• dilshan / 12v-automatic-ups
  12V Automatic UPS system
  ☆40Updated 3 years ago
• modtronix-com / esp32MX-E
  ☆32Updated 5 years ago
• UnexpectedMaker / vacuum-stencil-box
  ☆29Updated 3 years ago
• StetelThings / Maia-Esp32s2-Devboard
  Developer board for the Esp32-S2 chip from Espressif. Provides both USB interfaces: native and Uart bridge.
  ☆16Updated 4 years ago
• m2m-solutions / M2M_Quectel
  Arduino library for Quectel cellular modules.
  ☆15Updated 4 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• Aylo6061 / PDHV
  ☆34Updated 2 years ago
• dining-philosopher / litefeeder
  Semi-automatic passive printable/castable feeder for LitePlacer
  ☆59Updated 5 years ago
• sparkfun / SAMD21_Mini_Breakout
  A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.
  ☆42Updated 2 years ago
• adafruit / Adafruit-FONA-808-Breakout-PCB
  PCB files for the Adafruit FONA 808 Breakout
  ☆16Updated 6 years ago
• baldengineer / Open-Vapors
  Open Source Reflow Oven Controller.
  ☆19Updated 3 years ago
• riverdi / riverdi-eve-arduino
  Example Arduino app for the Riverdi Intelligent Display driven by Bridgetek EVE graphics controllers (FT8XX/BT81X)
  ☆18Updated last year