coopzone-dc / GotekLEDC68Links
This is an arduino library for using re-purposed LEDC68 3 digit LED displays from GoTek Drives
☆14Updated 4 years ago
Alternatives and similar repositories for GotekLEDC68
Users that are interested in GotekLEDC68 are comparing it to the libraries listed below
Sorting:
- PS/2 to C64 Mouse Adapter☆69Updated 10 years ago
- Hardware design of Magic Desk and Ocean compatible cartridge for the Commodore 64☆49Updated 10 months ago
- Source code for the popular SwinSID SID replacement☆61Updated 3 years ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆55Updated 4 months ago
- MSXDOS smaller 16K/32K rom with JIO, BEER and SODA IDE drivers and enhancements☆19Updated 2 weeks ago
- An old-school remake of the ZX Interface 2 with some modern tweaks - mainly by integrating bank switching into the interface itself. Ever…☆32Updated last year
- SRAM substitute for C64C shortboards☆61Updated 7 years ago
- A mix of the ZX Dandanator Mini! & the Multiply add-on.☆13Updated 6 months ago
- FPGATED based plus4 implementation using Papilio Pro platform☆20Updated 4 years ago
- Ersetzt den Analogteil einer Floppy 1541 oder 1541-II durch ein µC.☆47Updated 2 years ago
- ROM Emulator for the Amstrad CPC. Using a Pi Pico☆45Updated 11 months ago
- Atari 800XL PCB remake☆29Updated 4 years ago
- PlusD Clone for all ZX Spectrum computers, based on the designs by @Pachuquin & @alvaroalea.☆17Updated 4 months ago
- Inexpensive A500 hard disk interface☆27Updated last year
- SDBox-v2 for Amiga, compatible with the new updated card-detect firmware☆49Updated 4 years ago
- A ColecoVision clone☆19Updated last week
- Kung Fu SID is a firmware based on Kung Fu Flash which allows SID emulation☆50Updated 3 months ago
- Commodore 64 PLA replacement☆49Updated 8 months ago
- Open Hardware Fast Loader cartridge for the Commodore 64 and 128 - DO NOT USE!!!☆48Updated last year
- Double Clone ZX80/81☆23Updated 11 months ago
- Open Hardware 2364-27xxx (E)EPROM Adapter PCB☆77Updated 4 years ago
- ☆17Updated 6 months ago
- PCBoard design for an MSX expansion slot adapter to 1 full expansion slot + 1 IO Slot.☆11Updated 7 years ago
- An Extension Board for the Amstrad CPC based on the Blue Pill Microcontroller☆14Updated 11 months ago
- Z80 CPU tester PCB☆44Updated 2 years ago
- ☆59Updated 3 years ago
- CPLD Replacement for A2000 Buster☆71Updated last year
- SPI adapter that connects to the parallel port of an Amiga☆51Updated last week
- Reverse Engineering of the Schnedler Systems 4MHz TurboMaster accelerator cartridge for the Commodore 64☆26Updated 5 years ago
- An RGB adapter for TMS9928A and TMS9929A☆60Updated 5 years ago