groupgets / libuvcLinks
a cross-platform library for USB video devices
☆15Updated 8 months ago
Alternatives and similar repositories for libuvc
Users that are interested in libuvc are comparing it to the libraries listed below
Sorting:
- OpenNCC Kit☆33Updated 2 years ago
- XTRX PCI driver for linux☆18Updated 10 months ago
- A light-weight, fast PID library designed for use on embedded systems (but can also run on any machine which has a G++ compiler).☆20Updated 6 years ago
- Scripts to auto-generate pin mux drivers and board configuration tables for Tegra SoCs and boards☆31Updated 6 years ago
- Reference firmware for PureThermal 1 FLIR Lepton Dev Kit☆136Updated 8 months ago
- VEYE camera module software on RaspberryPi☆36Updated 3 months ago
- Antmicro's open hardware baseboard for the Google Coral i.MX8 + Edge TPU SoM☆80Updated 2 years ago
- 96Boards camera support from Deltavison :☆42Updated 7 years ago
- TensorFlow package for Cortex-M0-Plus, Cortex-M4, Cortex-M7, and Cortex-M55 CPUs.☆42Updated last year
- Tensorflow for Kendryte, optimized for KPU☆60Updated 7 years ago
- ☆27Updated last year
- NVIDIA Jetson IMX477 HQ RPI V3 camera driver☆134Updated 2 years ago
- FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.☆51Updated 5 years ago
- Yocto BSP meta layer for the UP Board☆30Updated 5 years ago
- A Platform for Digital Real-Time Control.☆15Updated 12 years ago
- NuttX fork for Spresense☆41Updated 3 years ago
- Build the Linux Kernel and Modules on board the NVIDIA Jetson Nano Developer Kit☆99Updated last year
- This driver is used for Arducam mipi camera with Pivariety board☆49Updated 3 years ago
- Allied Vision CSI-2 camera driver for NVIDIA Jetson Systems with JetPack 5.x☆115Updated 5 months ago
- Sony IMX219 Raspberry Pi V2 CMOS Datasheet and Source Code☆165Updated 9 years ago
- Cross-platform USB thermal camera viewer☆249Updated 8 months ago
- Vision Components MIPI CSI-2 camera module demo software☆18Updated last year
- USB Video Class capture examples for PureThermal 1 / PureThermal 2 FLIR Lepton Dev Kit☆139Updated 8 months ago
- Library and examples to connect the FLIR Lepton3 thermal camera to Nvidia Jetson embedded boards☆57Updated 3 years ago
- Boot NVIDIA Nano Jetson Developer Kit from a mass storage USB device (Jetson Nano devices A02, B01, 2GB and possibly Jetson TX1)☆132Updated 4 years ago
- PLEASE NOTE This is my personal fork. All issues should be reported upstream to raspberrypi userland unless specifically on a project bra…☆52Updated 4 years ago
- Это программа для управления тепловизором Flir One Gen 2 с компьютера IBM PC. Требуются драйвера из репозитория FlirOneDrivers.☆12Updated 5 years ago
- Tiny IIO Daemon Library☆23Updated last year
- MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices. Initial goal was to …☆19Updated 4 years ago
- IP Camera with S3 SOC from Allwinner, PoE Gigabit, LCD, micro SD, Flash☆40Updated 5 years ago