Alternatives and similar repositories for pi-bluetooth-obd

Users that are interested in pi-bluetooth-obd are comparing it to the libraries listed below

• brian03079 / piObdDashboard
  Dashboard application that collects and displays realtime car telemetry information such as speed, rpm, throttle, etc using a raspberry …
  ☆80Updated last year
• dorsic / RPi-OBD
  ODBII & GPS logger using Raspberry Pi and bluetooth
  ☆19Updated 8 years ago
• BirchJD / PiOBDII
  ODBII graphic interface on a Raspberry Pi computer, using an ELM327 Bluetooth/USB device. Read and display engine data, OBDII Trouble Cod…
  ☆292Updated 7 years ago
• gilbitron / Cardash
  OBD-II dashobard for Raspberry Pi powered by Nodejs
  ☆51Updated 11 years ago
• autopi-io / py-obd
  Python OBD-II serial module for reading engine data
  ☆63Updated 3 years ago
• Pbartek / pyobd-pi
  Fixes to pyobd for Raspberry Pi / BeagleBone Black
  ☆410Updated last year
• anthony-mills / raspberrypi-carputer
  UI component for the Nomadic Pi a Raspberry Pi based car computer. Allows interaction with MPD and GPSD backend services.
  ☆118Updated 7 years ago
• autopi-io / autopi-core
  The software that runs on the AutoPi Dongle.
  ☆177Updated 5 months ago
• stephenlacy / movel
  Móvel - Dashboard for Raspberry pi car computer
  ☆147Updated 9 years ago
• SebasES / ELM327-Wifi-OBDII-Adapter-with-Python
  python program to communicate with the ELM327 OBDII via wifi
  ☆27Updated 6 years ago
• peterh / pyobd
  Fixes to pyobd for modern hardware interfaces
  ☆464Updated 6 years ago
• brendan-w / pihud
  Configurable heads up display fit for the Raspberry Pi
  ☆46Updated 9 years ago
• brendan-w / python-ELM
  ELM327 simulator for testing OBD software
  ☆13Updated 9 years ago
• bendrick92 / obdPi
  A python project to pull vehicle information from a bluetooth OBD-II adapter and output to a 16x2 OLED display
  ☆36Updated 9 years ago
• educampos28 / OBD2_HACK
  Use ELM327 bluetooth device to evaluate all packages sent through CAN on OBD2 interface.
  ☆55Updated 7 years ago
• dchad / OBD-Monitor
  Tools for interfacing with vehicle engine control units using the OBD-II protocol.
  ☆69Updated 4 years ago
• Jnnshschl / PythonCarDisplay
  OBD2 Car-Display written in python for a Raspberry Pi with 480x320 display
  ☆25Updated 5 years ago
• AustinMurphy / OBD2-Scantool
  A scantool to read OBD2 info from cars.
  ☆233Updated 2 years ago
• BizDevGeek / OBD2SDK_Python
  Python SDK for Pi's car monitoring and using the OBD2 cloud storage service
  ☆21Updated 9 years ago
• bgunson / onboardpi
  On board diagnostic web application for vehicles
  ☆73Updated 9 months ago
• gregsqueeb / consultDash
  A program to read from a Nissan Consult port and display a dashboard. This was originally meant to be run on a raspberry pi and used as a…
  ☆161Updated 3 years ago
• JVital2013 / RoadApplePi
  An elegent "Black Box" solution that can be retrofitted into any car with an OBD(II) port for minimal cost.
  ☆248Updated 5 years ago
• sakurusurya2000 / pyobd
  ☆12Updated 7 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆111Updated 4 years ago
• alexandreblin / arduino-can-reader
  An Arduino sketch to read data from a CAN bus
  ☆96Updated 6 years ago
• Magister54 / opengauge
  Automatically exported from code.google.com/p/opengauge
  ☆143Updated 3 years ago
• Joelzeller / CoPilot
  Raspberry Pi powered in-car infotainment system
  ☆130Updated 5 years ago
• Knio / carhack
  Automotive data aquisition, logging, diagnostics, and visualization project. Focusing on CAN-bus and the Nissan 370Z
  ☆79Updated 9 years ago
• alexandreblin / arduino-peugeot-can
  Arduino sketch to retrieve data from a Peugeot's CAN bus
  ☆99Updated 8 years ago
• openvehicles / Open-Vehicle-Monitoring-System
  We are a group of enthusiasts who want an interface to be able to talk to our cars remotely, perhaps add on-car displays (such as heads-u…
  ☆331Updated 4 years ago