gk969 / stm32-speech-recognition
基于STM32的孤立词语音识别
☆307Updated 10 months ago
Alternatives and similar repositories for stm32-speech-recognition:
Users that are interested in stm32-speech-recognition are comparing it to the libraries listed below
- 一个基于云端语音识别的智能控制设备,类似于天猫精灵,小爱同学。采用的芯片为stm32f407,wm8978,esp8266。☆258Updated 6 months ago
- STM32 CM3 Project☆155Updated 5 years ago
- some device driver base on stm32f407☆187Updated 6 years ago
- ☆331Updated last year
- The littlevgl graphics library for RT-Thread. | 基于 RT-Thread 移植的littlevgl图形库.☆158Updated 4 years ago
- ebox是类似于arduino的一层api,简化stm32编程☆208Updated last year
- 专为MCU项目开发提速的代码框架☆362Updated last week
- STM32 IAP(UART模式)的上位机部分☆134Updated 6 years ago
- Code for OSLW☆80Updated 4 years ago
- STM32 IAP(UART模式)的Application部分(USMART版)☆72Updated 5 years ago
- 基于STM32的电子腕表设计。搭载了MPU6050和温湿度 传感器,以及一块1.14寸全彩显示屏。☆183Updated 4 years ago
- STM32 IAP(UART模式)的BOOT部分☆265Updated 5 years ago
- STM32系列离线烧写器☆194Updated 2 years ago
- 基于stm32的12864oled图形库☆311Updated 2 years ago
- 单片机APP程序☆490Updated 4 years ago
- 该代码仓主要用于发布基于红旭开发板的NORDIC 52840 BLE教程(This repository is mainly to publish the NORDIC 52840 BLE tutorials based on the HX DK)☆252Updated 3 years ago
- 基于STM32 HAL库的外设驱动库☆240Updated 2 years ago
- STM32串口DMA模式发送&接收实现,高速串口通信(1.5Mbps)不丢数据☆337Updated 2 years ago
- 一个非常简单好用的命令解析器,占用资源极少极少,采用哈希算法超快匹配命令!☆333Updated last year
- awtk在stm32f103ze平台上的移植。☆59Updated 3 months ago
- 一个基于C语言开发的面向底层设备驱动的驱动库☆162Updated last year
- a lightly timer manager base on STM32F10X,to processing asynchronous event.☆197Updated last year
- 以前做的项目,最近想要共享出来,包含51、430、STM32F10X、STM32F407X,T4MC123G这5种平台,基于每个平台都有一套相同的模块,包含继电器、直流电机、步进电机、温湿度传感器、气压传感器、串口RFID模块、串口mp3模块、串口gsm模块、键盘模块、点阵…☆91Updated 9 years ago
- AT指令解析框架,开发环境STMS32F103ZE,HAL库,通信模组使用移远BC28☆56Updated 5 years ago
- 基于STM32的智能桌面天气预报系统,具有语音识别功能,能用语音搜索天气,可进行简单的对话功能。☆60Updated 5 years ago
- 用于测试SPI_DMA_HAL的使用,主要为了减少两个字节间的时间间距☆12Updated 3 years ago
- stm32串口ISP☆105Updated 4 years ago
- PID 驱动代码及测试☆37Updated 7 years ago
- 适用于嵌入式单片机的差分升级库,通用所有单片机,如stm32、华大、复旦微、瑞萨等。适合嵌入式的差分升级又叫增量升级,顾名思义就是通过差分算法 将源版本与目标版本之间差异的部分提取出来制作成差分包,然后在设备通过还原算法将差异部分在源版本上进行还原从而升级成目标版本的过程。 …☆69Updated 4 months ago
- shell for MCU. 单片机命令行交互。☆288Updated 2 years ago