Alternatives and similar repositories for pi4gpu:

Users that are interested in pi4gpu are comparing it to the libraries listed below

• AmpereComputing / Steam-on-Ampere
  ☆99Updated 9 months ago
• spsgsb / kernel-common
  ☆37Updated 2 years ago
• jeffmakes / pi-data-recovery
  Recovering data from a bricked Raspberry Pi CM4. Same method would work on other Pis / SBC's
  ☆78Updated 2 years ago
• veniamin-ilmer / decoding_rom
  ☆21Updated last year
• geerlingguy / apple-pi
  Apple Pi - a NAS setup for my old Apple Computers
  ☆35Updated last year
• EvanKrall / pipad
  A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.
  ☆58Updated last year
• dosdude1 / zif-ide-ssd
  A custom-designed IDE SSD for use in any machine that utilizies a 1.8" ZIF IDE hard disk.
  ☆90Updated 2 years ago
• a-little-wifi / mxm-immobilizer
  MXM to PCIe adapter
  ☆40Updated 4 months ago
• stacksmashing / cs-sw-iphone15
  iPhone 15 compatible firmware for the central scrutinizer.
  ☆46Updated last year
• Uptime-Lab / ComputeBlade
  Compute Blade main repository
  ☆28Updated 8 months ago
• ZoidTechnology / PCIce
  A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.
  ☆89Updated 9 months ago
• geerlingguy / top500-benchmark
  Automated Top500 benchmark for clusters or single nodes.
  ☆265Updated 2 weeks ago
• l00nix / rpi-cm4-LiM-board
  A minimalistic Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board.
  ☆42Updated 2 years ago
• merocle / mincab
  small carrier board for Raspberry Pi CM4
  ☆151Updated 2 years ago
• merocle / Raspberry-Pi-CM4-stand
  Just a stand to store all your Raspberry Pi CM4
  ☆19Updated 2 years ago
• Gadgetoid / pico-universal-flash-nuke
  ☆36Updated 6 months ago
• arnarg / f3_backplane
  Backplane PCB for Terramaster F2-221, adding NVMe SSD
  ☆30Updated last year
• nicho810 / XIAO-PowerBread
  An open-source hardware project designed to offer a reliable and efficient power solution for breadboard prototyping. Featuring built-in …
  ☆64Updated this week
• TheGuyDanish / CM4_MATX
  CM4_MATX is an open source, micro-ATX standard compliant motherboard for the Raspberry Pi Compute Module 4
  ☆135Updated 2 years ago
• ZakKemble / RPi4-PCIe-Bridge
  Raspberry Pi 4 PCIe Bridge "Chip"
  ☆71Updated 2 years ago
• signaloid / C0-microSD-Hardware
  Verilog design examples for use with the Signaloid C0-microSD
  ☆45Updated 2 months ago
• icamaster / Pintry
  Two bay NAS based on the Raspberry Pi Compute Module 4
  ☆25Updated 3 years ago
• System64fumo / WoR-ControlPanel
  Windows on Raspberry Control Panel is a simple utility to make your WoR experience just a little bit easier
  ☆33Updated 11 months ago
• librerpi / rpi-tools
  ☆66Updated 3 months ago
• boredom101 / dev-expansion-card
  Framework Laptop Expansion Card
  ☆26Updated 3 years ago
• ExtremeElectronics / PicoCray
  A system for running distributed code over multiple PI Picos
  ☆130Updated 2 years ago
• Jana-Marie / diyiji
  Open source slanted desktop audio-monitor stand
  ☆10Updated 11 months ago
• ChalkElec / write-edid
  Writes custom EDID data into HDMI adapter (Linux, I2C)
  ☆69Updated 7 months ago
• AmpereComputing / NVIDIA-GPU-Accelerated-Linux-Desktop-on-Ampere
  This repo contains scripts and documents to enable Nvidia GPU accelerated desktop on Ampere CPU based workstation. It also demonstrated o…
  ☆25Updated last year
• moonglow / flashforge_firmware_tool
  FlashForge firmware tool allow you to decrypt and encrypt firmwares from FlashForge 3D printers, Dremel 3D20 and PowerSpec Ultra 3D
  ☆36Updated 2 years ago