Alternatives and similar repositories for FabScan100:

Users that are interested in FabScan100 are comparing it to the libraries listed below

• francisengelmann / FabScan
  Affordable 3D Laser Scanning of Physical Objects
  ☆94Updated 12 years ago
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• zelogik / AluXY
  A ful metal CoreXY system for 3D printer, mill etc..
  ☆47Updated 10 years ago
• fastbot3d / firmware
  ☆11Updated 8 years ago
• LibreScanner / horus-fw
  Horus firmware for 3D Scanner Ciclop
  ☆70Updated 8 years ago
• Smoothieware / Smoothie2-old
  (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.
  ☆34Updated 7 years ago
• dewy721 / EMC-2-Arduino
  Arduino + LinuxCNC = Your very own FREE high-end CNC controller.
  ☆117Updated 4 years ago
• bq / zum
  Electronic boards compatible with Arduino
  ☆129Updated 7 years ago
• Sardau / Sardauscan
  Under 30$ open source 3d Scanner
  ☆233Updated 3 years ago
• Traumflug / Generation_7_Electronics
  This is part of the RepRap project, see http://www.reprap.org. Gen7 is the next generation of electronics meant to drive a RepRap machine…
  ☆131Updated last year
• eMotion-Tech / uDelta
  µDelta sources
  ☆36Updated 10 years ago
• LaserWeb / deprecated-LaserWeb2
  Deprecated: use http://github.com/openhardwarecoza/LaserWeb3 instead
  ☆41Updated 8 years ago
• gvJaime / Sunrise
  3D Printable DLP 3D printer
  ☆47Updated 6 years ago
• danithebest91 / ServoStrap
  servo-controlled reprap 3D printer
  ☆98Updated 9 years ago
• RichCattell / Marlin
  Marlin Delta firmware with autocalibration updates
  ☆139Updated 9 years ago
• Protoneer / Raspberry-Pi-CNC
  Web interface for controlling a GRBL via a Raspberry Pi
  ☆90Updated 9 years ago
• spark3dp / ember-firmware
  Firmware for Autodesk Ember 3D printer
  ☆87Updated 7 years ago
• beardface / Marlin-OpenSL
  Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
  ☆15Updated 11 years ago
• shapeoko / Shapeoko_2
  Shapeoko v2 Official Release
  ☆116Updated 11 years ago
• nallath / PostProcessingPlugin
  ARCHIVED; Now part of Cura itself.
  ☆18Updated 7 years ago
• jcrocholl / rostock
  Delta robot 3D printer.
  ☆212Updated 12 years ago
• andreasbastian / openSLS
  OpenSLS: An Open Source Selective Laser Sintering Platform
  ☆64Updated 11 years ago
• Wallacoloo / printipi
  3d printing directly through the Raspberry Pi's GPIO pins
  ☆142Updated 8 years ago
• briandorey / DIY-Pick-and-Place-Hardware
  CNC and design files for DIY pick and place machines, auto and manual versions
  ☆57Updated 10 years ago
• robotsinthesun / monkeyprint
  A simple tool for pre-processing 3d models and controlling 3d DLP printers
  ☆60Updated 5 years ago
• tbuser / spinscan_turntable
  3D Printable Turntable for 3D laser scanning
  ☆46Updated 12 years ago
• Printrbot / printrboard
  Reprap Electronics for the Printrbot
  ☆82Updated 7 years ago
• RichRap / 3DR-Delta-Printer
  RepRap 3DR Delta 3D printer Design
  ☆69Updated 11 years ago
• andybarry / makerscanner
  Makerscanner Software
  ☆172Updated 8 years ago
• hairu / freelss
  FreeLSS is a laser scanning program for the Raspberry Pi. It allows a Raspberry Pi to function as the core to a complete turn table lase…
  ☆282Updated 5 years ago