Sardau / Sardauscan
Under 30$ open source 3d Scanner
☆235Updated 3 years ago
Alternatives and similar repositories for Sardauscan:
Users that are interested in Sardauscan are comparing it to the libraries listed below
- FreeLSS is a laser scanning program for the Raspberry Pi. It allows a Raspberry Pi to function as the core to a complete turn table lase…☆283Updated 6 years ago
- Electronic boards compatible with Arduino☆129Updated 8 years ago
- 3D Scanning multiplatform desktop application☆118Updated 7 years ago
- DIY 3D Scanner models☆403Updated 9 years ago
- DIY 3D Scanner models☆123Updated 9 years ago
- 3D Scanning multiplatform desktop application☆358Updated 5 years ago
- Marlin Delta firmware with autocalibration updates☆139Updated 9 years ago
- Horus firmware for 3D Scanner Ciclop☆58Updated 6 years ago
- Control software for resin 3D printers☆135Updated 2 years ago
- 3d printing directly through the Raspberry Pi's GPIO pins☆143Updated 9 years ago
- FabScan Pi Open Source 3D Scanner - Server application☆192Updated 11 months ago
- Horus firmware for 3D Scanner Ciclop☆70Updated 8 years ago
- Update to Eustathios with a little bit of HercuLien Design Changes☆110Updated 4 years ago
- LittleRP2 Open Source Resin Printer☆50Updated 9 months ago
- the simple and cheap corexy from smartfriendz☆66Updated 8 years ago
- BOM and parts for UM2☆334Updated last year
- Deprecated: use http://github.com/openhardwarecoza/LaserWeb3 instead☆186Updated 8 years ago
- ☆191Updated 8 years ago
- All the mechanics of the BCN3D Sigma 3D Printer.☆102Updated 7 years ago
- OO C++ RepRap Firmware☆147Updated 7 years ago
- Evolved open source DIY 3D printer filament extruder☆75Updated 3 years ago
- #VelocityPainting: patterning 3D prints by modulating the print speed☆208Updated 8 years ago
- servo-controlled reprap 3D printer☆98Updated 9 years ago
- MKS SBASE is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864 and MKS TFT T…☆156Updated 3 years ago
- FabScan1.5☆109Updated 8 years ago
- Open Source Laser Cutter / Engraver software. Supports gcode, svg, dxf, stl, png, jpg, bmp☆271Updated 7 years ago
- ☆38Updated 8 years ago
- Extensions for Inkscape☆137Updated 4 years ago
- Marlin3dPrinterTool is a open-source software that helps you configure and test your 3D printer.☆258Updated 2 years ago
- RepRap version of Zelogik's core-XY 3D printer☆83Updated 5 years ago