Alternatives and similar repositories for NanoVNA-Solver64-

Users that are interested in NanoVNA-Solver64- are comparing it to the libraries listed below

• goopypanther / OpenFieldProbe
  EMC near-field probe designs
  ☆33Updated 4 years ago
• AI5GW / SIGLENT
  Python code examples for SIGLENT gear
  ☆19Updated 3 years ago
• circuitvalley / LM399_Voltage_reference
  Simple LM399 Voltage Reference board
  ☆31Updated 8 months ago
• drandyhaas / Haasoscope
  Docs, design, firmware, and software for the Haasoscope
  ☆149Updated last year
• pecostm32 / Hantek_DSO2000
  Schematics and datasheets for the Hantek DSO2000 series
  ☆54Updated 11 months ago
• mean00 / lnDSO150
  Newer alternative firmware for the DSO150/DSO shell small oscilloscope
  ☆63Updated 8 months ago
• joseluu / D6_firmware
  Firmware for the D6 Simple spectrum analyzer with tracking source (T.G.)
  ☆24Updated 5 years ago
• paulvee / 100MHz-Differential-Probe
  100 MHz Differential Probe V2
  ☆51Updated 11 months ago
• CGrassin / hairpin_filter
  Hairpin filter generator and openEMS model.
  ☆21Updated 4 years ago
• ArminJo / Ultimate-Battery-Tester
  The ultimate battery tester with ESR measurement and discharge graph. Based on an Arduino Nano and a 1602 LCD.
  ☆57Updated this week
• oxullo / uctester
  Ultimate Continuity tester
  ☆30Updated 5 years ago
• chillmf / ADX-FT8-Pocket
  A Self Contained 500mWatt FT8 HF Transceiver Using SiLabs Si5351 and Si4732 ICs
  ☆21Updated 2 years ago
• jelinj8 / dso203
  attempt to restore buildability of Wildcat's DSO203 oscilloscope firmware + bugfixes
  ☆28Updated 7 years ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆53Updated 2 years ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆59Updated 10 months ago
• foxis / ESPReflow
  ESP8266 reflow controller
  ☆35Updated 2 years ago
• wagiminator / ADuM3160-USB-Isolator
  2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support
  ☆64Updated 3 years ago
• o7-machinehum / Protectli-UPS-Firmware
  Firmware for the Protectli UPS.
  ☆230Updated last year
• gcormier / kicad-pcbway
  This project template has pre-populated values in the PCB editor for the PCBWay minimums for their cheapest offering.
  ☆33Updated 6 years ago
• DangerousPrototypes / BusPirate5-hardware
  Bus Pirate Hardware and accessories for v5 and higher
  ☆80Updated 3 months ago
• coreWeaver / LC-Meter
  Open Source LC-Meter. All documentation included.
  ☆84Updated 3 years ago
• wagiminator / ATtiny814-USB-PD-Adapter
  USB Type-C Power Delivery Trigger and Monitoring Board
  ☆91Updated 2 years ago
• Aylo6061 / PDHV
  ☆34Updated 2 years ago
• nlroth / Solver32-LiteVNA-V2Plus4_joe.smith
  Solver32 is a 32-bit application for the LiteVNA as well as the V2Plus4. It was developed using National Instruments LabView 2011.
  ☆15Updated 2 years ago
• gsimon75-stm32 / scope
  An oscilloscope based on the STM32F103 'blue pill' module
  ☆30Updated 4 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆28Updated 7 years ago
• mean00 / stm32ComponentTester
  ☆36Updated 4 years ago
• Neumi / fastLOGIC
  An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and …
  ☆22Updated 5 months ago
• mattwach / fygen
  fygen is a Python library for Feeltech Signal Generators (FY2300, FY6600, FY6800, FY6900 and more)
  ☆99Updated 7 months ago
• pepijndevos / gps_sao
  ☆20Updated 2 years ago