fablab-wue / piTelex
Control a historic teletype device (Telex) with a Raspberry Pi or PC in Python3
☆33Updated 2 months ago
Related projects ⓘ
Alternatives and complementary repositories for piTelex
- ☆65Updated 7 months ago
- Manager for the Nortel Millennium series of payphones.☆60Updated 2 months ago
- V.23 Softmodem for Asterisk with some Bildschirmtext-specific stuff in it.☆61Updated 6 years ago
- Project notes, tools and utilities for the HP4952A protocol analyzer☆21Updated 4 years ago
- A simple v.23 modem including the data link layer. This is an application for Asterisk☆16Updated 5 years ago
- Repair info and schematics for mostly older MFM hard drives☆26Updated 3 months ago
- BaudotRSS - RSS and SMS support for antique 5-bit Teletype machines☆12Updated last year
- Geoff's VT100 Terminal☆78Updated last year
- HP 4952A Open Source☆15Updated 5 years ago
- ☆13Updated 10 months ago
- usb input adapter for sun workstations☆33Updated this week
- ☆10Updated 2 months ago
- A v23 softmodem☆14Updated 7 years ago
- Firmware for EBTKS V2.0☆11Updated 5 months ago
- A rewrite of Dr. Tony Fisher's software modem for Linux.☆31Updated 4 years ago
- A versatile DIY serial terminal☆105Updated last month
- RTL8019 Ethernet card for the RC2014 Z80 computer☆13Updated 3 years ago
- Read and write an LTO tape's cartridge memory chip☆31Updated 3 years ago
- Emulate DEC LK201 keyboard using a standard PC USB keyboard☆46Updated 3 years ago
- Notes on using TL866II Plus with minipro software on openSUSE☆52Updated last year
- utilites for Hewlett Packard LIF files☆20Updated last week
- 9-track tape restoration lab☆28Updated 2 years ago
- Accurately dump Commodore 64 tapes by building an inexpensive hardware adapter☆48Updated last year
- MFM emulator code☆50Updated 3 weeks ago
- set dcf77 radio clocks through radio emissions of your display/monitor. my best hack ever.☆20Updated 6 years ago
- DEC PDP-11/PDP-8 RX02 drive emulator☆19Updated 6 months ago
- Capture the output from a computer's parallel printer port.☆20Updated 2 months ago
- This project aims to make a Alfaskop 4110 running towards the Hercules IBM emulator and run the MEMO SW.☆11Updated 2 years ago
- DAHDI, but modified to support revertive pulse signalling.☆11Updated last year
- Old school Arduino modem, Bell 103 compatible, at 300 baud☆22Updated 4 years ago