drewgarrido / pidish_slicer
Takes 3D object files (STL files) and slices them into 2d PNG files for an SLA 3d printer to use.
☆20Updated 6 years ago
Alternatives and similar repositories for pidish_slicer:
Users that are interested in pidish_slicer are comparing it to the libraries listed below
- Open-source, SLA 3D printing, for biomimetic prototyping.☆17Updated 6 years ago
- The STL-tweaker is a python module which finds an optimal orientation for a 3D object on the printing platform to improve the efficiency …☆26Updated 2 years ago
- slices 3D models from STL files☆22Updated 8 years ago
- A browser based GPU accelerated 3D model slicer☆29Updated 6 years ago
- Amaranth HDL framework for laser scanner with motion control☆28Updated this week
- Dan Heeks's experimental CAD/CAM software built on Dan's PyCAD, not to be confused with the more famous PyCAM.☆30Updated 8 months ago
- Minimalistic FW for Processing GCode to Galvanometer signals☆89Updated 5 months ago
- Complete designs for a completely custom built Laser-SLA 3D printer. My own Mechanical Designs, Firmware, and Software.☆30Updated 10 years ago
- Yet another 3D model slicer for DLP/SLA 3D printing machines.☆25Updated 7 years ago
- Open Source inkjet piezoelectric print head optimized for biofabrication☆23Updated 9 years ago
- 3D Printable DLP 3D printer☆47Updated 7 years ago
- PCB deign for OpenGalvo OPAL☆20Updated 2 years ago
- Script to generate Hypocycloid Gears Sketch☆25Updated 9 years ago
- A matlab project of "FDM_3D_Printing_Slice_Program"☆22Updated 5 years ago
- A Serial Terminal for FluidNC☆21Updated 2 years ago
- ☆28Updated 4 years ago
- FreeCAD Feed and Speeds Calculator☆36Updated 4 months ago
- ☆50Updated 6 years ago
- This OpenSCAD module provides the required mechanisms to spray a pattern on a surface.☆21Updated 6 years ago
- Open source Mirror Galvanometer SLS 3D printer.☆68Updated 3 years ago
- Component for engraving non flat surfaces using LinuxCNC☆16Updated 10 years ago
- python based cam-tool to convert dxf into gcode☆65Updated 2 weeks ago
- MKS DLP is a powerful photocuring 3D Printer Controller Board With MKS Robin TFT35 Display, 2K Sharp screen. Open source hardware schemat…☆33Updated 4 years ago
- A voxel based slicer for 3D printing on FDM/FFF, binder/powder, SLS printers and laser cutters.☆23Updated last year
- direct control and reading of the TCD1304AP linear CCD array by a teensy 2++ (https://www.pjrc.com/store/teensypp.html)☆31Updated 8 years ago
- Curved Layer Fused Filament Fabrication (CLFFF) Algorithm that produces G-Code with normal vectors for 5 axis 3d printing. Uses variable …☆25Updated last year
- CAM system for hobbyists and shapeokers☆22Updated 5 years ago
- Pure CadQuery models of various electronic boards and components.☆15Updated last year
- G-code Toolpath Generator☆46Updated 5 months ago
- Ester 3D Laser Printer☆39Updated last year