Alternatives and similar repositories for RFLinkGateway

Users that are interested in RFLinkGateway are comparing it to the libraries listed below

• Iture / RFLinkGateway
  MQTT Support for RFLink Gateway (http://www.nemcon.nl/blog2) project
  ☆36Updated last year
• piotrC4 / mqtt-rflink-bridge
  Homie based bridge between MQTT and RFlink module
  ☆22Updated 5 years ago
• cwesystems / RFLink
  ☆12Updated 7 years ago
• jabdoa2 / Asksin_HM_LC_Sw1PBU_FM
  Homematic Custom Firmware for HM-LC-Sw1PBU-FM
  ☆20Updated 5 years ago
• 1technophile / 433toMQTTto433
  This program enables to: - receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data - publish…
  ☆13Updated 8 years ago
• HerrHofrat / deconz-config
  ☆17Updated 6 years ago
• cyrilcc / org.openhab.binding.rflink
  RFLink binding for OpenHAB 2.0
  ☆23Updated last year
• Phileep / rflink-to-mqtt
  Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE
  ☆38Updated 7 years ago
• puuu / MQTT433gateway
  MQTT 433.92 MHz radio-frequency device gateway
  ☆137Updated 2 years ago
• heliflieger / a-culfw
  Alternative culfw
  ☆128Updated 2 years ago
• 999LV / NUT_UPS
  UPS Monitor plugin for Domoticz using NUT protocol
  ☆13Updated 6 years ago
• bertmelis / VitoWiFi
  Communicate with Viessmann boilers using the optolink for ESP8266 and ESP32
  ☆130Updated last month
• kaeferfreund / dbus-kostal
  Victron VenusOS dbus binding for Kostal Plenticore inverters
  ☆11Updated 3 years ago
• maros / Zway-BaseModule
  Zway automation base module for module developers
  ☆6Updated 6 years ago
• ImEmJay / esphome-config
  My current configuration for all devices based on ESPHome.
  ☆16Updated 9 months ago
• xoseperez / sonoffsc
  Itead Studio SonoffSC custom firmware with MQTT and Domoticz support
  ☆103Updated 6 years ago
• trilu2000 / NewAskSin
  working version of new AskSin framework, which should be more structured then the old one
  ☆28Updated 8 years ago
• tIsGoud / Doorbell-via-Wemos-and-optocoupler
  Digital version of my "analog" doorbell project to determine if the doorbell was pressed.
  ☆59Updated 7 years ago
• Bouni / max-cube-protocol
  A attempt to write down the protocol of the eQ3 / ELV MAX! Cube
  ☆118Updated 5 months ago
• RFD-FHEM / SIGNALDuino
  System to capture digital signaldata and transfer them to another system
  ☆88Updated 2 weeks ago
• davwil / venus_kostal_plenticore
  Victron Venus Os Plugin for Plenticore Plus inverters
  ☆22Updated 7 months ago
• shuckc / pytexalarm
  Interface with (and impersonate) Texecom Alarm panels over UDL protocol in python
  ☆19Updated last month
• elric91 / ZiGate
  Python library for ZiGate
  ☆18Updated 5 years ago
• CurlyWurly-1 / ESP8266-H801-MQTT
  ESP8266 / H801 RGB controller using MQTT and WiFi onboarding
  ☆30Updated 4 months ago
• emc2cube / MySWeMosIRShield
  IR blaster shield for WeMos D1 Mini with HTTP and MySensors support
  ☆40Updated 2 weeks ago
• pmcgn / dbus-modbus-client-kostal-smartmeter
  ☆21Updated last month
• oskarn97 / xiaomi-zb2mqtt
  Xiaomi Zigbee to MQTT bridge using zigbee-shepherd
  ☆21Updated 6 years ago
• stefanbode / Sonoff-Tasmota
  Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options
  ☆126Updated 7 months ago
• scalz / MySensors-HW
  My personal Workspace for Mysensors HW
  ☆34Updated 5 years ago
• madmartin / Jarolift_MQTT
  Controlling Jarolift TDEF 433MHZ radio shutters via ESP8266 and CC1101 Transceiver Module in asynchronous mode
  ☆71Updated 2 years ago