Alternatives and similar repositories for Zway-BaseModule

Users that are interested in Zway-BaseModule are comparing it to the libraries listed below

• dmartinpro / RFLinkGateway
  MQTT Support for RFLink Gateway (http://www.rflink.nl) project
  ☆8Updated 5 years ago
• uebelack / zway-mqtt
  MQTT module for Z-Way
  ☆14Updated 8 years ago
• ltoinel / ZWave2MQTT
  A NodeJS bridge between Z-Wave devices and MQTT
  ☆18Updated last year
• 1technophile / 433toMQTTto433
  This program enables to: - receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data - publish…
  ☆13Updated 8 years ago
• perrin7 / ninjacape-mqtt-bridge
  Python script for grabbing the JSON data over serial from the NinjaCape and publishing it as MQTT messages
  ☆31Updated 9 years ago
• Edubits / Zway-MQTT
  Publishes the status of devices to a MQTT topic and is able to set values based on subscribed topics.
  ☆29Updated 4 years ago
• ImEmJay / esphome-config
  My current configuration for all devices based on ESPHome.
  ☆16Updated 10 months ago
• hobbyquaker / dashbutton2mqtt
  Publish dash button presses to a MQTT broker 🔘📡
  ☆16Updated 7 years ago
• elric91 / ZiGate
  Python library for ZiGate
  ☆18Updated 5 years ago
• shabunin / cf-sonytv
  CommandFusion module for SonyTV
  ☆35Updated 10 years ago
• dale3h / hue-mqtt-bridge
  MQTT bridge for Philips Hue Dimmer and Hue Tap
  ☆51Updated 7 years ago
• cwesystems / RFLink
  ☆12Updated 7 years ago
• emmetdel / hikvision-api
  ☆11Updated 3 years ago
• HerrHofrat / deconz-config
  ☆17Updated 6 years ago
• nouknouk / node-zigate
  ZiGate USB-TTL module for Node.js
  ☆11Updated 4 years ago
• shuckc / pytexalarm
  Interface with (and impersonate) Texecom Alarm panels over UDL protocol in python
  ☆19Updated 3 weeks ago
• 999LV / NUT_UPS
  UPS Monitor plugin for Domoticz using NUT protocol
  ☆13Updated 6 years ago
• Iture / RFLinkGateway
  MQTT Support for RFLink Gateway (http://www.nemcon.nl/blog2) project
  ☆36Updated 3 weeks ago
• thomas-villagers / avsend
  Sends YNCA commands via TCP to Yamaha AV Receiver models RX-V673, RX-A720, RX-V773, RX-A820, RX-A1020 etc.
  ☆9Updated 8 years ago
• jpmens / notify-by-mqtt
  A Nagios/Icinga module to submit notifications to mqttwarn
  ☆15Updated 2 years ago
• NetHome / ZWave
  A clean API for the ZWave protocol with minimal external dependencies
  ☆24Updated 7 years ago
• bkjaya2020 / docker-ivms4200-linux-new
  A docker image pre-installed ivms4200-Linux based on bkjaya1952/q4wine-x11vnc-novnc-docker
  ☆18Updated 4 years ago
• Grayda / ninja-allone
  Ninja Blocks driver for the Orvibo AllOne IR blaster
  ☆50Updated 9 years ago
• scudre / alarm-central-station-receiver
  Python daemon for receiving events from a home alarm system via Contact ID protocol
  ☆39Updated 6 years ago
• colinodell / mqtt-control-panel
  A simple alarm control panel for Home Assistant's manual_mqtt alarm. Designed to run on a Raspberry Pi using an Adafruit 3.5" PiTFT.
  ☆85Updated 5 years ago
• mikma / python-lightify
  Python module for Osram lightify. This is a work in progress.
  ☆25Updated 9 years ago
• surfzoid / HikNetExtractor
  Provides functionality to extract periodically record event from Hikvion camera or NVR with ISAPI and HTTPDigestAuth enable. Add this s…
  ☆16Updated 2 years ago
• pastukhov / nodemcu-ssdp
  A SSDP daemon for NodeMCU
  ☆21Updated 10 years ago
• aptalca / docker-ha-bridge
  Docker container for Home Automation Bridge
  ☆29Updated 8 years ago
• jpmens / check-mqtt
  A Nagios/Icinga plugin for testing an MQTT broker
  ☆65Updated 7 months ago