Alternatives and similar repositories for cmio

Users that are interested in cmio are comparing it to the libraries listed below

• Squonk42 / buildroot-licheepi-zero
  Buildroot for the LicheePi Zero board
  ☆34Updated 7 years ago
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 5 years ago
• femtoduino / femto-beacon
  FemtoBeacon - Atmel SAM R21 (ARM Cortex M0+, SAM D21 with built in AT86RF233)
  ☆66Updated 5 years ago
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆34Updated 4 years ago
• bitluni / GameWing2USB
  ☆35Updated 5 years ago
• jnk0le / RFM7x-lib
  library for ones of the worst of chinese nRF24l01+ "alternatives"
  ☆71Updated last year
• watterott / HDMI-Adapter
  Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...
  ☆73Updated 5 years ago
• Jana-Marie / USB-PD-Firmware
  USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware
  ☆31Updated 5 years ago
• LAtimes2 / TeensyLogicAnalyzer
  Logic Analyzer for the Teensy development boards (pjrc.com/teensy)
  ☆87Updated 4 years ago
• tuxyme / metal-pi
  Raspberry PI bare metal
  ☆48Updated 11 years ago
• cnlohr / pi_tpi
  Using a Raspberry Pi to program an ATTiny10 9 5 or 4
  ☆46Updated last year
• smdprutser / SWM050
  ☆19Updated 7 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 7 years ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 9 years ago
• sparkfun / SparkFun_Artemis
  World's first open source hardware module using a Cortex-M4F capable of running TensorFlow models and Arduino sketches..
  ☆41Updated 4 years ago
• ReclaimerLabs / USB_PD
  USB Power Delivery library
  ☆85Updated 7 years ago
• mcauser / VCC_GND_F407VE
  MicroPython board definition for the VCC GND STM32F407VET6 mini board
  ☆21Updated 4 years ago
• vinodstanur / qi_wireless_receiver_attiny13
  A Qi wireless power receiver using attiny13
  ☆57Updated 6 years ago
• adafruit / Adafruit-FT232H-Breakout-PCB
  PCB files for the Adafruit FT232H Breakout
  ☆38Updated 5 years ago
• tmtrcreations / Pi-Compute-3-Lite-BLANK
  Blank KiCad schematic for creating a project with the Pi CM3L.
  ☆30Updated 6 years ago
• espressif / esp31-smsemu
  ☆37Updated 9 years ago
• hopkinskong / esp32-ssh-server
  ESP32 SSH Server (Proof of concept)
  ☆49Updated 7 years ago
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆27Updated 7 years ago
• 1Bitsy / 1bitsy-examples
  Example projects for the 1BitSy development boards.
  ☆37Updated last year
• casanovg / timonel
  ATtiny85/45/25 I2C bootloader
  ☆113Updated 2 years ago
• OLIMEX / ESP32-PRO
  ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG
  ☆50Updated last year
• har-in-air / ESP32-LCD-I2S
  Espressif ESP32 driving a controller-less monochrome lcd with parallel I2S bus
  ☆67Updated 5 years ago
• timonsku / Minimal-RPi-CM-4-Carrier
  A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.
  ☆125Updated 4 years ago
• arturo182 / serpente_hw
  ☆35Updated 5 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆56Updated 5 years ago