Alternatives and similar repositories for libsml

Users that are interested in libsml are comparing it to the libraries listed below

• linknx / linknx
  Linknx is a service aimed at interacting with KNX devices. It features a value cache to save bus bandwidth and exposes a rules engine all…
  ☆50Updated 5 months ago
• rscada / libmbus
  Meter-bus library and utility programs
  ☆250Updated 11 months ago
• franckmarini / KnxDevice
  Allow to turn your Arduino into a self-made KNX device using the hardware TPUART interface
  ☆146Updated 3 years ago
• envy / esp-knx-ip
  A KNX/IP library for the ESP8266 with Arduino
  ☆147Updated 3 years ago
• weinzierl-engineering / baos
  BAOS SDK - http://weinzierl-engineering.github.io/baos
  ☆43Updated 3 years ago
• thelsing / CreateKnxProd
  Simple Gui to create simple knxprod file for ETS.
  ☆60Updated 3 years ago
• volkszaehler / libsml
  Implementation in C of the Smart Message Language (SML) protocol
  ☆97Updated 3 months ago
• onitake / daliserver
  Command multiplexing server for the Tridonic DALI USB adapter
  ☆75Updated last year
• sde1000 / python-dali
  Library for controlling DALI lighting systems
  ☆192Updated last month
• ffcrg / ecpiww
  A wireless EnergyCam Setup with a Raspberry Pi to monitor the energy usage
  ☆34Updated 9 years ago
• roarfred / MBusMqttLogger
  An M-bus master that poll a meter and logs data to an MQTT server
  ☆52Updated 9 years ago
• calimero-project / calimero-server
  KNXnet/IP server for KNX IP, KNX (RF) USB, FT1.2, and TP-UART
  ☆71Updated 3 weeks ago
• ascillato / Tasmota_KNX
  Alternative Firmware for 'ESP8266, ESP8285 and ESP32 based devices' like Itead Sonoff, Shelly or NodeMCU, with Web, Timers, OTA, MQTT, KN…
  ☆48Updated last year
• niclash / zboss
  ZigBee Open Source Stack, v1.0 from DSR Wireless in case they take it down.
  ☆48Updated 11 years ago
• mhaas / mqtt-to-influxdb-forwarder
  IoT MQTT to InfluxDB forwarder
  ☆46Updated 7 years ago
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆74Updated 6 years ago
• thelsing / knx
  knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS
  ☆329Updated 2 months ago
• atlewee / node-red-contrib-knx-easy
  Use KNX just like the mqtt nodes
  ☆20Updated 6 years ago
• victronenergy / dbus-mqtt
  Venus OS service mapping the D-Bus on Venus OS to MQTT
  ☆118Updated last year
• knxd / knxd
  ☆583Updated 2 months ago
• ganehag / pyMeterBus
  Pure Python implementation of the Meter-Bus (M-Bus EN13757-3) protocol.
  ☆93Updated last month
• OpenKNX / Kaenx-Creator
  Create your own KnxProd Files with UI.
  ☆93Updated last month
• zigbeer / cc-znp
  The interface for a host to communicate with TI CC253X Zigbee Network Processor(ZNP) over a serial port.
  ☆60Updated 6 years ago
• gmasse / esp-modbus-mqtt
  A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)
  ☆93Updated last year
• victronenergy / dbus_modbustcp
  Modbustcp server, that allows for example PLCs to get data from the D-Bus.
  ☆45Updated last month
• calimero-project / calimero-core
  Core library for KNX network access and management
  ☆152Updated 3 weeks ago
• mqtt-smarthome / mqtt-smarthome
  Smart home automation with MQTT as the central message bus - Architectural proposal
  ☆450Updated 3 years ago
• Tinkerforge / warp-charger
  Mit WARP, Abkürzung für "Wall Attached Recharge Point", bietet Tinkerforge Open Source Ladelösungen für Elektrofahrzeuge.
  ☆67Updated 3 weeks ago
• zigpy / bellows
  A Python 3 project to implement EZSP for EmberZNet devices
  ☆214Updated last week
• JeyRunner / knxMicroController
  library to access knx bus for Microcontroller
  ☆20Updated 8 years ago