Alternatives and similar repositories for NbComm

Users that are interested in NbComm are comparing it to the libraries listed below

• dukelec / cdstep
  Stepper Motor Controller
  ☆57Updated 2 months ago
• GlideLeo / STM32-RTThread-BootLoader
  移植SpunkyWX STM32的开源Bootloader框架-RT-FOTA，运行完整RT-Thread，支持RTT官方的RBL文件，Ymodem传输，一键恢复出厂固件等功能。
  ☆63Updated 4 years ago
• DinoHaw / mOTA
  An OTA component developed for 32-bit MCUs 一款专为 32 位 MCU 开发的 OTA 组件
  ☆48Updated 2 years ago
• Kevincoooool / AltiumDesigner_PcbLibrary_3D
  3D package library collection
  ☆75Updated 7 years ago
• armink / HackSTLinkUpgrade
  暴力升级你的 ST-Link 及 STM32CubeIDE
  ☆108Updated 3 years ago
• armfly / H7-TOOL_PC_XE7
  PC机软件
  ☆68Updated 6 years ago
• dukelec / cdbus_gui
  Serial / CDBUS / CDNET GUI Tool
  ☆161Updated this week
• armfly / H7-TOOL_STM32H7_Boot
  单片机引导程序
  ☆75Updated 6 years ago
• loogg / agile_modbus_mcu_demos
  Agile Modbus 在 MCU 上的例子
  ☆53Updated 2 years ago
• USTHzhanglu / dap_download
  一个简单的GUI，为DAP-LINK提供烧录工具，基于tkinter，pygubu和pyocd。
  ☆30Updated 2 years ago
• SmartElec / STM32-IAP-HEX-Merge
  STM32 IAP HEX合并上位机 hex2bin
  ☆58Updated 3 years ago
• jiejieTop / stm32_kfifo
  基于Linux的kfifo移植到STM32
  ☆31Updated 7 years ago
• zscircuits / zs1100a
  All files hardware and software related to the zs1100a
  ☆76Updated 3 years ago
• AnalogDragon / flir
  AMG8833 STM32F1 MDK
  ☆73Updated 6 years ago
• PeakRacing / MCUProg
  MCUProg is a MUC programming host computer software based on pyocd+PySide6
  ☆45Updated 2 months ago
• XIVN1987 / MCUProg
  MCU programmer for J-LINK and DAPLink, using Keil MDK's *.FLM Flashing Algorithm
  ☆175Updated 4 months ago
• FlandreUNX / uModbusMaster
  modbus_Master|多主机|RTX支持|基本方法支持|归一化调用
  ☆114Updated 8 years ago
• tianxiaoMCU / RTT2UART
  Segger RTT to serial UART
  ☆68Updated 2 years ago
• Aladdin-Wang / MicroLink
  一款集多功能于一体的嵌入式系统开发工具
  ☆117Updated last month
• leiyitan / 20-Channel-High-Side-NMOS-Driver-Board
  一款20通道，带回读、指示灯、过流保护，NMOS高侧驱动板（24V,10A）
  ☆21Updated 6 years ago
• ppvision / PicoXTools
  ☆65Updated 2 years ago
• EDI-Systems / G2T01_GeCov
  Simple general-purpose embedded system code coverage test tool
  ☆47Updated 7 years ago
• cherry-embedded / HSCanT-hardware
  HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
  ☆32Updated 11 months ago
• L231 / SerialAssistant
  可连接多设备搭建监控系统，发送列表支持打包报文，可编辑报文解析规则的一款串口调试助手
  ☆18Updated 2 years ago
• maxlicheng / stm32f4_modbus_tcp
  基于stm32f4的modbus tcp上下位机通信项目，上位机由LabVIEW编写
  ☆179Updated 5 years ago
• roger-zhao / Amobss-PC-GCS
  This is a GCS based on C# for Windows7/10, which is forked and modified from https://github.com/ArduPilot/MissionPlanner
  ☆18Updated 2 years ago
• rtpkgs / dwin
  基于RT-Thread物联网操作系统的dwin串口屏幕快速开发库!
  ☆62Updated 7 years ago
• figght / zBitsView
  ☆53Updated 5 years ago
• shuai132 / ScopeMCU
  虚拟示波器 MCU端
  ☆112Updated 2 years ago
• loogg / libmodbus
  ☆55Updated 3 years ago