brianinnes / vPiP
A python library with accompanying Arduino code to drive a vertical plotter from a Raspberry Pi. This project is targeted to drive the driver board created by makeBournemouth, but will work with any system capable of running Python and connecting to an Arduino/Genuino to drive the stepper motors
☆16Updated 6 years ago
Alternatives and similar repositories for vPiP:
Users that are interested in vPiP are comparing it to the libraries listed below
- Polar graph controler that uses repetier firmware. Inspired by work at http://www.polargraph.co.uk☆123Updated 6 years ago
- ☆63Updated 2 years ago
- Qt based GUI to control the spherebot☆54Updated 6 years ago
- Modification of grbl that provides motion in polar coordinates and other features for our graffiti machine. Grbl is open source, embedded…☆42Updated 6 years ago
- Software and hardware designs for Polargraph robot drawing machines☆134Updated 8 years ago
- Optimize drawing plan for a polargraph☆57Updated 9 years ago
- Arduino Firmware for the SphereBot, an EggBot inspired robot, modified for the AdaFruit motor shield v2.☆21Updated 11 months ago
- Deprecated: use http://github.com/openhardwarecoza/LaserWeb3 instead☆41Updated 8 years ago
- Firmware for PolargraphSD based on Arduino MEGA 2560, current until 2018.☆22Updated 6 years ago
- Deprecated: use http://github.com/openhardwarecoza/LaserWeb3 instead☆186Updated 8 years ago
- ☆167Updated 5 years ago
- CNC firmware for many different control boards and kinematic systems. Originally the brain of the Makelangelo art robot.☆160Updated 3 years ago
- Extensions for Inkscape☆136Updated 3 years ago
- Any image to GCode translation (via CrossHatch & Contour)☆14Updated 9 years ago
- Software for the AxiDraw drawing machine☆80Updated 2 years ago
- Arduino Firmware for the SphereBot, an EggBot inspired robot☆51Updated 13 years ago
- grbl 0.9i with Servo motor support☆47Updated 3 years ago
- Polargraph models☆18Updated 5 years ago
- servo-controlled reprap 3D printer☆98Updated 9 years ago
- Cyclone (Circuit Cloner) is a CNC mill intended for PCB manufacturing.☆24Updated 9 years ago
- ☆66Updated 5 years ago
- Xenomai / Raspberry-PI based driver for Blackstripes drawbots.☆26Updated 7 years ago
- Special Grbl version for use with servo instead of spindle or laser.☆89Updated 7 years ago
- Creates gcode for use on drawbots☆174Updated 6 years ago
- Arduino Firmware for Spherebot / Eggbot integration in Inkscape☆94Updated 11 months ago
- Open Source 3D Mesh Slicer in Processing: Generates gcode from stl files.☆71Updated 14 years ago
- buildlog 2.x inspired laser cutter☆36Updated 9 years ago
- Portable, Accurate, Open Source 3D Printer☆51Updated 6 years ago
- A GCODE sender for the 3dpBurner laser cutter/engraver (GRBL based)☆36Updated 7 years ago
- Inkscape extension for outputting G-Code for the MakerBot Unicorn Pen Plotter☆176Updated 7 years ago