Alternatives and similar repositories for Mdot2Matrix

Users that are interested in Mdot2Matrix are comparing it to the libraries listed below

• cnlohr / ch32v003_3digit_lcd_usb
  ch32v003 USB Driver for 3-digit 7-segment TN LCDs with touch
  ☆184Updated 8 months ago
• cnlohr / cnixxi
  My experiment with nixie tubes.
  ☆140Updated 2 weeks ago
• Matthias-Wandel / caliper-interface
  Connecting cheap digital calipers to Raspberry Pi and decode readings
  ☆122Updated 5 months ago
• CRImier / MyKiCad
  My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
  ☆218Updated 5 months ago
• holysnippet / pico_eth_doc
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆108Updated 2 years ago
• wagiminator / CH552-USB-Knob
  Rotary Encoder with NeoPixels and USB Interface
  ☆165Updated 2 years ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆58Updated 8 months ago
• sabogalc / project-piCo
  Because it should be a crime to release a product with Micro-USB in the 2020s
  ☆134Updated 11 months ago
• CentyLab / RotoPD
  Repo for RotoPD hardware and documentation
  ☆138Updated this week
• jonny12375 / rp3a0
  Reverse engineering the RP3A0 SoC from the Raspberry Pi Zero 2W
  ☆148Updated last week
• dakhnod / ESP32-Bluetooth-USB-dongle
  Allows to use a ESP32 dev board like a regular Bluetooth dongle
  ☆99Updated last year
• sabogalc / KiCad-Arduino-Boards
  A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
  ☆52Updated 10 months ago
• sphawes / fiber-laser-pcb-fab
  Instructions and settings for fabricating PCBs on a fiber laser, namely the xTool F1 Ultra
  ☆111Updated 7 months ago
• ZoidTechnology / PCIce
  A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.
  ☆90Updated last year
• CarlBugeja / PCB-Hot-Plate
  Reflowing PCBs with PCBs!
  ☆88Updated 3 years ago
• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆34Updated 11 months ago
• tobychui / PD-Adjustable-DC-Power-Supply
  A DIY, USB PD powered, pocket sized adjustable DC / lab bench power supply for electronic makers
  ☆80Updated 3 months ago
• Architeuthis-Flux / JumperlessV5
  The next generation jumperless breadboard
  ☆218Updated last week
• EvanKrall / pipad
  A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.
  ☆59Updated last year
• o7-machinehum / Protectli-UPS-Firmware
  Firmware for the Protectli UPS.
  ☆228Updated last year
• Gadgetoid / pico-universal-flash-nuke
  ☆41Updated 9 months ago
• diminDDL / ProPico
  An RP2040 dev board improving on aspects of the pi pico
  ☆248Updated last year
• wagiminator / ATtiny412-PocketRadio
  Small FM Radio with RDS and OLED
  ☆139Updated 2 years ago
• mfolejewski / FEMTO
  FEMTO - RP2040 12x12mm PCB module
  ☆150Updated 2 years ago
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆33Updated last year
• m1geo / Pi5_PCIe
  A crude reverse engineering of the Pi5 PCIe connector & potential breakout boards.
  ☆70Updated last year
• Nicolai-Electronics / rp2040-i2c-interface
  ☆242Updated last year
• tjko / fanpico
  Fanpico: Open Source Programmable PWM (PC) Fan Controller
  ☆178Updated last week
• jenschr / USB-C-Connectors
  Various cheap USB-C connectors from LCSC for KiCad
  ☆126Updated last week
• jduffy105 / HydraMeter_0.4
  Open source multimeter
  ☆130Updated 8 months ago