Alternatives and similar repositories for CANT

Users that are interested in CANT are comparing it to the libraries listed below

• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• christoph2 / cxcp
  BlueParrot XCP
  ☆38Updated last week
• linklayer / busmaster
  BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…
  ☆38Updated 4 years ago
• kurt-vd / test-can-j1939
  Readme + howto for can-j1939
  ☆41Updated 7 years ago
• openxc / bitfield-c
  Bit array parsing and encoding utility library in C
  ☆95Updated 3 years ago
• spirilis / mcp2515
  Microchip MCP2515 SPI CAN controller - Driver library for TI MCUs
  ☆52Updated 5 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆46Updated 3 years ago
• cvra / can-bootloader
  The bootloader used to flash our CAN-connected boards
  ☆145Updated 2 years ago
• Zubax / canface_cf1
  High performance CAN-USB/CAN-UART adapter + UAVCAN devboard
  ☆36Updated 2 years ago
• linklayer / cantact-pro-hw
  Hardware design files for the CANtact Pro
  ☆72Updated 4 years ago
• marel-keytech / openCANopen
  Open Source CANopen Stack
  ☆60Updated 5 years ago
• astand / uds-to-go
  DoCAN/ISO-TP/UDS lightweight implementation suitable for applications in MCU projects
  ☆30Updated last year
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆69Updated 3 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆69Updated 6 years ago
• mikebailey61 / J1939_stack
  J1939 stack
  ☆53Updated 10 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆82Updated last month
• darauble / lawicel-slcan
  Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate
  ☆29Updated 6 years ago
• Hirofeng / cantp
  Code implemention of ISO 15765-2 CAN transport layer.
  ☆27Updated 6 years ago
• Truck-OBD-Development / J1939_Decode
  ☆26Updated 9 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆64Updated 2 months ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆79Updated last year
• podonoghue / usbdm-firmware
  Firmware for USBDM BDMs
  ☆49Updated 8 months ago
• Sauci / CanTp
  Implementation of the CanTp module (ISO 15765-2), according to AUTOSAR specification v4.4.0
  ☆61Updated 2 months ago
• SummerFalls / UDS_SecurityAccess
  UDS 0x27 Security Access Algorithm DLL for ZLG ZCANPRO, CANoe, ETS, Vehecle Spy3.
  ☆52Updated 3 years ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆78Updated 2 years ago
• raychow / UDSonCAN
  Unified Diagnostic Services on Controller Area Network
  ☆59Updated 11 years ago
• altelch / uds
  ISO 14229-1 UDS protocol implementation for Arduino
  ☆54Updated 10 months ago
• shreaker / OpenXCP
  An open source XCP based measurement and calibration system for automotive ECUs
  ☆103Updated 7 years ago
• rbei-etas / busmaster-installers
  BUSMASTER Installer Executables
  ☆17Updated 7 years ago
• normaldotcom / canable-fw
  Firmware for the CANable USB to CAN adapter
  ☆204Updated last year