Alternatives and similar repositories for FollowFocusMotorControl

Users that are interested in FollowFocusMotorControl are comparing it to the libraries listed below

• frifox / zhiyun
  ☆16Updated 4 years ago
• schoolpost / BlueMagic32
  Arduino ESP32 Library for connecting to Blackmagic Cameras using Bluetooth Low Energy.
  ☆101Updated 11 months ago
• err4o4 / tilta-nucleus
  Tilta Nucleus N reverse engineering
  ☆26Updated 4 years ago
• boldstelvis / BMC_SBUS
  hacked library and test sketch for controlling blackmagic micro cameras from an arduino over sbus
  ☆44Updated 6 years ago
• lydasia / openltc
  An Open Source SMPTE Linear Timecode Generator Based on ATmega328P(Arduino UNO).
  ☆63Updated 3 years ago
• mungewell / pico-timecode
  A budget friendly LTC/TimeCode device built from a RaspberryPi Pico - using the PIO blocks and MicroPython
  ☆51Updated 6 months ago
• nrobertus / Blackmagic-LANC
  A project to control the Black Magic line of cameras through the LANC port, probably with an arduino or ESP 8266
  ☆19Updated 7 years ago
• jeffmikels / timecode_tools
  Implements LTC and MTC versions of the SMPTE timecode spec.
  ☆35Updated 3 years ago
• FrankBoesing / LinearTimecode-Decoder
  LTC decoder for Teensy Audio Library
  ☆32Updated 5 years ago
• mitkunz / diy_timecode_generator
  SMPTE standard-compliant DIY LTC timecode generator, that supports framerates of 24, 25, or 30 fps (NDF).
  ☆22Updated last year
• rileycoyote87 / DJI-Ronin-RS2-Log-and-Replay
  based on the Ronin SDK this simple two script python setup reads and logs gimbal yaw, roll, pitch, and focus position, and then can repla…
  ☆47Updated 2 years ago
• Wodie / RoninS_CAN
  Ronin-S CAN protocol debug.
  ☆13Updated 4 years ago
• Julusian / arduino-lanc
  Arduino based LANC to serial
  ☆17Updated 8 years ago
• bjarque / t265_UE
  Intel Realsense t265 into Unreal Engine
  ☆42Updated 2 years ago
• lplassman / V4L2-to-NDI
  A video input (V4L2) to NDI converter that works with Raspberry Pi (32-bit and 64-bit), and Intel/AMD CPUs
  ☆89Updated 4 months ago
• SK-Hardwired / xavc_rtmd2srt
  Extract real time meta-data and GPS tracks from Sony XAVC video
  ☆43Updated 4 years ago
• MrExplode / ShowManager
  ArtNet and LTC timecode generator.
  ☆47Updated last week
• AlexNe / arduino_lanc_sample
  Arduino camera remote control (LANC interface)
  ☆24Updated 9 years ago
• BoaSimon / NakinoWheels
  An open-source camera control hand-wheels project based on the Kino Wheels project.
  ☆11Updated 5 years ago
• storyboardcreativity / Z-Camera-E1-Reverse-Engineering
  Z Camera E1 firmware reverse-engineering results.
  ☆39Updated last year
• xtremestuff / protune-transforms
  GoPro Protune Flat & LogB ACES IDTs and YRGB Transforms for DaVinci Resolve (Based off HERO5 Black)
  ☆145Updated last year
• graphicsvending / OpenCV_LensCalibration
  ☆19Updated 3 years ago
• mrassi / REtrackerDEMO
  RealSense T265 tracker by Rassi Engineering
  ☆30Updated 3 years ago
• roukou3 / DCTL
  This is DCTL which can make precise correction of the fisheye lens.
  ☆33Updated last year
• mathijsk / Arduino-Library-for-ATEM-Switchers
  A library for connecting an Arduino with Ethernet shield to Blackmagic Designs ATEM video switcher range.
  ☆18Updated 13 years ago
• claud9999 / lutoc
  Linear Timecode Generator for ESP32
  ☆12Updated 4 years ago
• imaginevision / Z-Camera-Doc
  Document for Z Camera
  ☆159Updated last month
• antimodular / ofxZCamE1
  OpenFrameworks addon to use the API of the Z Camera model E1
  ☆12Updated 7 years ago
• rgbbytes / blackmagic-bluetooth-control
  Control Blackmagic Design cameras using Bluetooth Low Energy
  ☆11Updated 5 years ago
• BryanCrotaz / blender-artnet
  Blender script to push artnet data to Evee lights
  ☆40Updated 2 years ago