bigmagic123 / esp32c3_bare_metal

Related projects: ⓘ

• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆68Updated 10 months ago
• WRansohoff / ESP32_minimal
  Minimal code for a 'bare metal' ESP32 program which does not use ESP-IDF. Really just a learning exercise because the ESP-IDF is Apache-l…
  ☆43Updated 5 years ago
• bouffalolab / bl808_linux
  ☆127Updated 8 months ago
• niicoooo / esp32-elfloader
  esp32 component to load in ram and relocate elf file
  ☆82Updated 2 years ago
• sipeed / M1s_BL808_SDK
  M1s(BL808)SDK
  ☆55Updated last year
• sipeed / M1s_BL808_example
  M1s_BL808_example
  ☆66Updated last year
• cpq / mdk
  A bare metal SDK for the ESP32 & ESP32C3
  ☆198Updated last month
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆49Updated 2 years ago
• sipeed / M1s_BL808_Linux_SDK
  M1s_BL808_Linux_SDK
  ☆27Updated last year
• georgerobotics / cyw43-driver
  ☆79Updated last month
• damien-lemoal / riscv64-nommu-buildroot
  ☆42Updated 3 years ago
• sipeed / Longan_GD32VF_examples
  example project for Longan Nano (GD32VF)
  ☆85Updated 4 years ago
• diodep / ch55x_dualserial
  CH552 Dual USB to Serial Bridge.
  ☆76Updated last month
• esmil / gd32vf103inator
  Program the GD32VF103 using C, your favourite editor and make
  ☆46Updated last year
• dwelch67 / raspberrypi-pico
  Raspberry Pi pico baremetal examples
  ☆115Updated 2 years ago
• wuxx / nanoCH32V203
  ☆62Updated last year
• cjacker / opensource-toolchain-bouffalo-lab
  Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab
  ☆16Updated last year
• openwch / ch32v20x
  CH32V203 is an industrial-grade enhanced low-power,small-medium capacity general-purpose MCU based on 32-bit RISC-V core
  ☆71Updated 3 months ago
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆33Updated last year
• espressif / xtensa-isa-doc
  ☆49Updated 3 years ago
• cjacker / opensource-toolchain-8051
  Opensource toolchain for 8051 8-bit MCU
  ☆27Updated last year
• wagiminator / MCU-Templates
  Templates for bare-metal firmware development for some entry-level microcontrollers
  ☆59Updated last week
• wuxx / nanoCH32V003
  ☆69Updated last year
• fduignan / Longan-Nano-GD32VF103CBT6-PlatformIO
  Various PlatformIO examples for the Longan Nano Risc-V board
  ☆13Updated 4 years ago
• stm32duino / FatFs
  FatFs is a generic FAT file system module for small embedded systems. The FatFs is written in compliance with ANSI C and completely separ…
  ☆82Updated 11 months ago
• espressif / openocd-on-esp32
  OpenOCD port running on ESP32-S3 microcontrollers
  ☆52Updated 7 months ago
• jcmvbkbc / linux-xtensa
  Linux port for xtensa architecture. None of these branches are stable.
  ☆145Updated 2 weeks ago
• unframework / licheepi-nano-buildroot
  Config files for full Lichee Pi Nano Linux image build
  ☆114Updated 6 months ago
• r4d10n / micropython-wch-ch32v307
  MicroPython for WCH CH32V307
  ☆31Updated 2 years ago
• aappleby / picorvd
  GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
  ☆174Updated 5 months ago