Alternatives and similar repositories for patch-antenna-util

Users that are interested in patch-antenna-util are comparing it to the libraries listed below

• rookiepeng / antenna-models
  CST design files of antennas used in my researches and projects.
  ☆136Updated 6 years ago
• jonkraft / Pluto_Beamformer
  DIY digital beamformer using ADALM-PLUTO
  ☆86Updated 3 months ago
• jonkraft / PlutoSDR_Labs
  Hands on labs for the ADALM Pluto SDR
  ☆70Updated 3 years ago
• daveshah1 / RFToolSDR
  AD9361 based USB3 SDR
  ☆118Updated 8 years ago
• oscimp / oscimpDigital
  OscillatorIMP ecosystem for the digital characterization of ultrastable oscillators and Software Defined Radio (SDR) frontend processing
  ☆58Updated last week
• xaxaxa-dev / vna
  a simple and cheap vector network analyzer, including support software
  ☆161Updated 5 years ago
• jonkraft / PhasedArray
  10 GHz Phased Array beamforming labs
  ☆141Updated 4 years ago
• jankae / LibreCAL
  4 port eCal module
  ☆104Updated 2 months ago
• oscimp / PlutoSDR
  BR2_EXTERNAL framework for Analog Device's PlutoSDR Zynq
  ☆46Updated 11 months ago
• jmfriedt / max2771_fx2lp
  multi MAX2771 GNSS receiver
  ☆44Updated last month
• iliasam / STM32F4_SDR_GPS
  STM32 based SDR GPS receiver
  ☆82Updated 6 months ago
• srsran / zynq_timestamping
  Open source Zynq timestamping implementation from Software Radio Systems (SRS)
  ☆73Updated 2 years ago
• radiosd / PlutoSdr
  Access and cotrol of PlutoSDR hardware using python bindings to libiio
  ☆33Updated 5 years ago
• jankae / VNA
  1MHz to 6GHz USB based vector network analyzer
  ☆148Updated 5 years ago
• Ttl / vna2
  Second version of homemade 30 MHz - 6 GHz VNA
  ☆241Updated 8 months ago
• myriadrf / pyLMS7002Soapy
  Python bindings for LMS7002M with SoapySDR backend
  ☆66Updated 4 years ago
• lukeweston / SimpleFMCWRadar
  A simple, low-power, low-cost 5.8-6.0 GHz microwave FMCW radar
  ☆111Updated 11 years ago
• analogdevicesinc / TransceiverToolbox
  MATLAB toolbox for ADI transceiver products
  ☆62Updated 6 months ago
• analogdevicesinc / plutosdr_scripts
  Small scripts and examples to make interacting with the PlutoSDR easier
  ☆95Updated last year
• qrp73 / NanoVNA-MATLAB
  MATLAB scripts for NanoVNA vector network analyzer. Connect, save S2P, display Logmag, Smith chart and TDR step response
  ☆22Updated 5 years ago
• matthuszagh / pyems
  High-level python interface to OpenEMS with automatic mesh generation
  ☆90Updated last year
• analogdevicesinc / pyadi-iio
  Python interfaces for ADI hardware with IIO drivers (aka peyote)
  ☆193Updated this week
• LubomirJagos / OpenEMS-Antenna-Simulations
  Complete antenna simulations from rapid design in FreeCAD and simulate using openEMS
  ☆32Updated 4 years ago
• oscimp / pluto-adsb-sim
  pluto-adsb-sim generates ADSB signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADALM-Pluto.
  ☆29Updated 5 years ago
• MillePoels / MurPhySDR
  MurPhySDR is an open source software-defined radio platform based on the AD9364 transceiver IC.
  ☆14Updated last year
• timcardenuto / testPlutoSDR
  ☆24Updated 5 years ago
• OpenResearchInstitute / DVB-receiver
  Work being done on the DVB-receiver for Phase 4 Ground.
  ☆58Updated 2 years ago
• zinka / arraytool
  Python based package for phased array antenna design and analysis
  ☆149Updated 8 years ago
• vankxr / icyradio
  Over-engineered SDR development board
  ☆45Updated 2 months ago
• dlharmon / pyopenems
  A Python wrapper to the OpenEMS FDTD solver with Kicad footprint generation
  ☆86Updated last year