bcl / digitempLinks
1-wire temperature sensor cmdline interface
☆40Updated 3 weeks ago
Alternatives and similar repositories for digitemp
Users that are interested in digitemp are comparing it to the libraries listed below
Sorting:
- rdserialtool - RDTech UM/DPS/RD series device interface tool☆99Updated 3 years ago
- Dump the state of the BCM270x GPIOs☆122Updated 4 months ago
- Home of the OWFS project source code☆100Updated last year
- Issue tracking for the archive.raspberrypi.com repo☆41Updated 4 years ago
- Control the power settings for a USB hub☆63Updated 2 years ago
- Mark Lord's FTDI FT232R programming tool, with Debian packaging☆28Updated 7 years ago
- Decoder for Oregon Scientific v1 protocol wireless temperature sensors with RTL-SDR and GNU Radio.☆179Updated 8 years ago
- C code to decode the Revision: field of /proc/cpuinfo on the Raspberry Pi☆35Updated 2 weeks ago
- TJTAG JTAG flash programmer for WRT54G and related routers with Raspberry Pi support☆86Updated 7 years ago
- Broadcom CFE Bootloader☆43Updated 2 years ago
- ☆40Updated 10 years ago
- Whsniff is a command line utility that interfaces TI CC2531 USB dongle with Wireshark for capturing and displaying IEEE 802.15.4 traffic …☆137Updated last year
- Automatically exported from code.google.com/p/rfexplorer☆22Updated 8 years ago
- RfMon: a software spectrum analyzer for the RFM12B tranceiver module☆41Updated 7 years ago
- Faifa can configure any Intellon-based Power Line Communication device using Intellon INT5000 and INT6000 series chips (6000 and 6300 chi…☆63Updated 4 years ago
- Yet another DCF77 decoder. This one is intended for the Raspberry Pi platform but might work on other devices using GPIO pins too.☆19Updated last year
- The objective of this project is to provide an SDK and root file system for the Raspberry Pi that is lightweight and takes full advantage…☆229Updated 3 years ago
- PL2303HX Userspace GPIO control tool☆35Updated 5 years ago
- AVR-based IR interface for lircd☆29Updated 4 years ago
- A Linux kernel SPI-driver for the RFM12B and RFM69CW RF modules by HopeRF☆114Updated 3 years ago
- ☆54Updated 2 years ago
- Simple script to easily enable & disable the Raspberry Pi's serial console☆135Updated 3 years ago
- RT5350 "3G Router" OpenWRT firmware files☆15Updated 7 years ago
- a drop-in replacement for RTL283XACCESS.dll☆28Updated 4 years ago
- The EEPROM software for the WCH CH341A originally written by asbokid☆50Updated last year
- Build an open source fm radio station with your raspberry pi☆150Updated last year
- Python library to control LG TVs via their serial (RS232) port☆84Updated 4 years ago
- Bluetooth Client for Owon B35 Multimeter☆34Updated 7 years ago
- ☆23Updated 8 years ago
- Use the arduino as a JTAG adaptor with Tjtag☆48Updated 5 years ago