bagges / deye-esp32-bridgeLinks
☆53Updated 7 months ago
Alternatives and similar repositories for deye-esp32-bridge
Users that are interested in deye-esp32-bridge are comparing it to the libraries listed below
Sorting:
- Esphome component for Deye 3 phase inverters for Home Assistant☆190Updated 11 months ago
- Little Program for ESP82XX to get the Victron data to web and MQTT☆94Updated this week
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE☆104Updated 2 months ago
- Read data From Seplos BMS and send them to the Home Assistant☆46Updated 2 years ago
- Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…☆162Updated last year
- Adding WiFi monitoring to US2000B and US2000C batteries.☆150Updated 3 years ago
- Firmware battery safety controller (BSC)☆138Updated last week
- Integrate EVCC connected charger into Victron Ecosystem☆26Updated last year
- This Venus OS driver gets the data from MQTT and displays it as pv inverter.☆83Updated last month
- Small utility to read data from DEYE Inverters (and clones)☆105Updated 6 months ago
- ESPHome component to monitor a Solax X1 mini via RS485☆40Updated 3 months ago
- An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)☆109Updated 3 months ago
- Integrate Shelly 1PM into Victron Energies Venus OS as a pv inverter☆58Updated last year
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆59Updated last year
- Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.☆29Updated 3 months ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆93Updated last week
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆57Updated 3 years ago
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆175Updated 2 months ago
- Integrate Shelly 3EM smart meter into Victron Energies Venus OS☆158Updated last year
- T2SG *.bin file for a ESP8266 WEMOS D1 mini. Its purpose is to read the total power from a Shelly 3EM and send it via UART to Trucki's RS…☆121Updated last week
- This Venus OS driver gets the data from MQTT and displays it as battery.☆58Updated 2 weeks ago
- RS485-Interface-for-Sun-GTIL2-1000☆51Updated last month
- This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.☆96Updated 6 months ago
- Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.☆332Updated 4 months ago
- EspEpeverController mit Webseite, Der Esp8266 ist über ein Rs485 Modul mit dem Epever Solar Laderegler verbunden und kann diesen die verf…☆45Updated 2 years ago
- A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt☆142Updated last month
- Integrate opendtu and ahoy into Victron Energies Venus OS as a pv inverter☆146Updated last month
- Shell script that manages Victron Venus OS ESS-Systems and/or Shelly Plug S and/or AVM Fritz!DECT200 and 210 switchable sockets so that i…☆59Updated last month
- Deye Firmware for LV and HV☆84Updated last week
- Hardware battery safety controller (BSC)☆29Updated last year