arturo182 / keyboard_featherwing_hw
☆36Updated 4 years ago
Alternatives and similar repositories for keyboard_featherwing_hw:
Users that are interested in keyboard_featherwing_hw are comparing it to the libraries listed below
- Repository moved to https://github.com/solderparty/bbq10kbd_i2c_sw☆51Updated 4 years ago
- Various tools for hacking the smartresponse XE☆34Updated 6 years ago
- Moved to https://github.com/solderparty/keyboard_featherwing_sw☆14Updated 3 years ago
- Composite video output from M0 microcontrollers☆18Updated last year
- ☆35Updated 5 years ago
- Send sketches wirelessly from the Arduino IDE to your SMART Response XE☆36Updated 6 years ago
- EAGLE silkscreen label generator☆76Updated last year
- Schematics of the SMART Response XE terminal☆47Updated 2 years ago
- ☆51Updated 3 years ago
- Audio out with an FTDI UART cable☆43Updated 3 years ago
- Discussion, files, spec, and more for a M.2 standard for makers☆32Updated 4 years ago
- The SHARPIW0 carrier board has been designed to hold both a Raspberry(R) PI ZERO 2W or W + 2.7" (400x240) Sharp Memory Display. This dis…☆17Updated 3 years ago
- SMART Response XE based pagers for the 503 Party 2019☆15Updated 5 years ago
- USB Host Co-processor☆79Updated 4 years ago
- ☆25Updated 3 years ago
- Firmware for 3 keyboards(QWERTY, GameBoy, Calculator). They are based on MEGA328 chip.☆42Updated 3 years ago
- Attiny85-based device to enable and disable write-protection on any SD card☆22Updated 2 years ago
- The 4chord USB MIDI Keyboard☆36Updated last month
- ☆27Updated 3 years ago
- Eagle image importer☆22Updated 4 years ago
- A QTouch-compatible library☆44Updated last year
- ☆16Updated 10 months ago
- 100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain☆34Updated 3 years ago
- Cordwood-style blinky ring, powered by an ATtiny85 and a pair of size 10 Zn-air hearing aide batteries.☆38Updated 6 years ago
- Kernel module for the bbq10pmod☆20Updated 4 years ago
- Reviing the TI92 calculator with a new KICAD PCB and a new 4 inch display☆39Updated last year
- USB M.2 card using RP2040☆26Updated 2 years ago
- This is an enclosure for the Hackaday Supercon 2023 Vectorscope badge☆21Updated 10 months ago
- The Noiseplug, an ATtiny9 µC playing a chiptune☆67Updated 7 years ago
- This is the Arduino compatible firmware running Little Helper, a little device that is useful in electronic labs. The firmware also shows…☆29Updated 7 years ago