Alternatives and similar repositories for aditof_sdk

Users that are interested in aditof_sdk are comparing it to the libraries listed below

• Kevin-WSCU / 96Boards-Camera
  96Boards camera support from Deltavison :
  ☆41Updated 7 years ago
• analogdevicesinc / ToF
  ☆38Updated this week
• antmicro / ov9281-camera-board
  Camera board with a pair of OmniVision OV9281 sensors
  ☆55Updated last year
• LI01 / linux_camera_tool
  Sample code for Leopard USB3.0 Camera Linux Camera Tool
  ☆72Updated 3 years ago
• VC-MIPI-modules / vc_mipi_nvidia
  Vision Components MIPI CSI-2 driver for NVIDIA Jetson Nano, Xavier NX, AGX Xavier, TX2 and Orin Nano, Orin NX
  ☆99Updated this week
• ni / usb3vision
  Driver for USB3 Vision(TM) class devices
  ☆71Updated last month
• mtx512 / v831-npu
  Reverse engineering the V831 npu
  ☆93Updated 3 years ago
• alliedvision / linux_nvidia_jetson
  Allied Vision CSI-2 camera driver for NVIDIA Jetson Systems.
  ☆109Updated 5 months ago
• InES-HPMM / FPD-LinkIII_Raspberry_HW
  FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.
  ☆49Updated 4 years ago
• antmicro / sdi-mipi-bridge-hw
  Antmicro's open hardware 3G SDI into MIPI CSI-2 converter
  ☆58Updated last year
• antmicro / zynq-video-board
  Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.
  ☆58Updated last year
• rellimmot / Sony-IMX219-Raspberry-Pi-V2-CMOS
  Sony IMX219 Raspberry Pi V2 CMOS Datasheet and Source Code
  ☆155Updated 8 years ago
• Xilinx / VVAS
  Vitis Video Analytics SDK
  ☆38Updated last year
• NVIDIA-AI-IOT / argus_camera
  Simple Python / C++ interface to CSI camera connected to NVIDIA Jetson.
  ☆89Updated 6 years ago
• antmicro / google-coral-baseboard
  Antmicro's open hardware baseboard for the Google Coral i.MX8 + Edge TPU SoM
  ☆76Updated last year
• antmicro / jetson-nano-baseboard
  Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
  ☆486Updated last year
• valentis / jetson-nano-gpio-example
  C code example for using the GPIO Pins of NVIDIA Jetson Nano by memory mapping.
  ☆38Updated 5 years ago
• ArduCAM / ArduCAM_USB_Camera_Shield
  This is the repository for ArduCAM USB Camera Shield
  ☆127Updated last year
• centuryarks / CA378-AOIS
  Drivers - Camera Module products equipped with OIS
  ☆18Updated last year
• RidgeRun / NVIDIA-Jetson-IMX477-RPIV3
  NVIDIA Jetson IMX477 HQ RPI V3 camera driver
  ☆132Updated 2 years ago
• ArduCAM / MIPI_Camera
  ☆249Updated 10 months ago
• fastr / yavta
  fork of git://git.ideasonboard.org/yavta.git
  ☆34Updated 14 years ago
• alliedvision / examples
  Code examples for Allied Vision Alvium CSI-2 camera, V4L2
  ☆41Updated 3 months ago
• jdthomas / bayer2rgb
  Command line utility to convert bayer grid data to rgb data. Integrates with ImageMagick.
  ☆104Updated 3 years ago
• veyeimaging / raspberrypi
  VEYE camera module software on RaspberryPi
  ☆35Updated last month
• pointcloudAI / libPointCloud
  libPointCloud SDK is a cross-platform library for PointCloud.AI® DepthEye™ depth cameras.
  ☆15Updated 4 years ago
• jamesrivas / FPGA_Stereo_Depth_Map
  ☆23Updated 11 years ago
• InES-HPMM / linux-l4t-4.4
  Linux kernel 4.4 forked from Nvidia Linux4Tegra for TX1 and TX2. Supports L4T 28.1 and 28.2.1
  ☆32Updated 5 years ago
• NVIDIA / jetson-rdma-picoevb
  Minimal HW-based demo of GPUDirect RDMA on NVIDIA Jetson AGX Xavier running L4T
  ☆180Updated 10 months ago
• nbrummel / SIFT-implementation-in-Verilog
  Using Verilog to implement the SIFT algorithm into an FPGA for small robotic situations
  ☆39Updated 11 years ago